Search results

Black Mica MSP Roller '03 roller with about 150k Missing turbo and lines, some minor rust, hole in the block, driver's side doors kicked by PO when the engine let go, and no rear sway bar. Trans and LSD are good. I'd like it gone. $600 with trans OR $350 without. List Date: 5/31/2015 For...

PEP 3" MSP Downpipes - P.E.P. downpipes are 304SS throughout which includes the casting, tube, flange, and flex. - Replaces the "S" and "J" pipes with a one piece design - Very robust design and construction - Bolts to the midpipe in the stock location using a generic 2 bolt flange. - 4.5...

PEP Upgraded Mazdaspeed Protege Exhaust Manifolds - P.E.P. manifolds are 304SS throughout which includes the flanges, casting, and EGR fitting - Utilizes 1/2" flanges 4 mm thick walls to ensure strength with a low weight - Positions the turbo in the stock location - All Manifolds include...

I decided after a two plus year absence that I'd make my way back here. I'm glad to be back, but must adhere to the forum rules. I won't be discussing my parts here so please no threads looking for me or pms sent to my inbox. If you want or need info about the parts I sell please look me up via...

I turned off the green so I'm starting a conventional FS thread with pics. I still have lots of parts that aren't pictured and are posted in older threads, but I'll get to them later. All prices are SHIPPED in the continental 48. Paypal to tom@popeperformance.com ONLY if you are relaxed about...

I'm clearing out the protege stuff and have started on my new toy /dd/ daddy mobile. I hope its up to the task. I bought it for next to nothing, slapped a plastidip paint job on it and some 17x9.5 speedlines that I found on craigslist and I'm ready to start enjoying some hillbilly fun. Here's...

FSDE from '95 Ford Probe - $200. Has great compression (180 across the board) and the car ran and drove great before the engine was pulled. This is a distributor motor but I was planning to run coil on plug with the megasquirt so that didn't matter to me. G Series 5 spd. trans from '98 626 -...

I'm parting with the 3rd gen protege and am looking to clear out the driveway and garage so here's the deal. I bought the car in february with the intention of using it as a testbed for my products and as a fun driver. The business has kept me so busy I haven't been able to put it together and...

I'm down to the last 21 downpipe castings. I will not be ordering another batch so this is it. I usually get $340 for a downpipe with flex and flange. At ten buyers I'll do $300 shipped, if I can get 20+ sold I'll drop the price to $275 shipped. The group buy goes through Saturday, August 4th...

I've had a change of plan and won't be able to use my forged setup so here it is: K1 Rods with Wiseco Pistons and ARP hardware, stock bore, 8.5:1 compression ratio, standard length rods - used for approximately 20k miles - $500 (Pending with money down to 719prottege) FS Block (with good crank)...

I've alluded to this is a few posts, but haven't really put anything together. I'm going to get to work on the car soon so I figured I go ahead and start a thread. Pics and lots of info to come. Here's what I have so far: '03 Spicy shell - bought with no engine or trans Custom plug and play...

My garage looks like a few msps blew up in it. I'm selling duplicates first and then I'll do another round of sales once I'm sure that I don't need anything. Also before I get hassled about forum pics, it is my understanding that AMM status relieves me of that. Strut tower bar painted black -...

Because I get the downpipe castings made in China I'm constantly getting Chinese suppliers contacting me and trying to get me to buy things like LED lighting or miscellaneous car parts. Today I was contacted by a company that supplies turbos. I'm not interested in a Chinese v mainstream turbo...

I'm building myself a plu and play harness for my megasquirt and I need an ecu. I'm looking for something cheap. If you have a scrap ecu I want it.

I hate to spam the forum, but figured I'd go ahead and post. I periodically get an email or pm asking if my downpipes are still for sale. The answer is, "Yes, why of course they are." If you're looking for a downpipe you won't find anything nicer or better flowing no matter what you spend. Pipes...

If someone has a spare that they can take a couple dimension off of I would much appreciate it. I need to know the ID, OD, and bolt spacing. I have the first round of thermostat housing spacers coming in this week and now I'm not sure if the housing gasket I used is from an FS or KL. If you can...

The manifold will be $475 shipped for a base manifold. O2 is a $25 option. EGR will be a $25 option, and EWG will be a $50 option. For those interested in EWG, I'll also be offering a simple dump tube but I haven't even started looking at that yet. The manifold is all 304SS, 1/2" flanges, and...

Hey everyone! I've been selling a few downpipes per month and have had a lot of very happy customers. People who buy a finished pipe with flex and flange get a great part. The problem is that when people have ordered an unfinished pipe it's designed to need work and people don't always realize...

I've had a few requests for an affordable intake manifold so I turned on the AMM status to see if the interest level is high enough to justify bringing the part to market. Here's what I would be offering: Fully TIG welded Aluminum construction Velocity stacks inside the plenum CNC cut flanges...

Any classic Audi guys out there? I'm not an avid poster, but I do like to share ideas and be able to get info when its needed. Anyone know which of the forums will suit me? Thanks