Mad Hatter
Member
- :
- 02 Axiom, 02 MP5
This is a very easy to do mod. Probably the easiest next to a cai.
First thing, pull the e-brake, and jack up the car. I recommend using jack stands, then remove the passenger wheel.
Next, using a 10mm socket remove the inner wheel liner(see pic1), to expose the crank pulley(pic2).
Next, using a 14mm socket loosen the 2 bolts on the P/S, oil pump pulley(just loosen, see pic3). Next turn bolt(12mm, as shown in pic4) to loosen the drive belt, when the tension is released enough, remove the belt(only loosen enough to remove).(Note you may want to use a 1/2"ratchet, with a 1/2to3/8 reducer, and then the 14mm socket to loosen the bolt as shown in the pic where the ratchet is)
Next, using the 14mm socket, loosen the bolt on the underside (again just loosen) of the alternator(see pic5), then loosen the other bolt(12mm) on the outerside of the alt(bolt a pic6), after the 2 of these are loose, turn bolt b(pic6) to loosen the drive belt, and remove(only loosen enough to remove).
First thing, pull the e-brake, and jack up the car. I recommend using jack stands, then remove the passenger wheel.
Next, using a 10mm socket remove the inner wheel liner(see pic1), to expose the crank pulley(pic2).
Next, using a 14mm socket loosen the 2 bolts on the P/S, oil pump pulley(just loosen, see pic3). Next turn bolt(12mm, as shown in pic4) to loosen the drive belt, when the tension is released enough, remove the belt(only loosen enough to remove).(Note you may want to use a 1/2"ratchet, with a 1/2to3/8 reducer, and then the 14mm socket to loosen the bolt as shown in the pic where the ratchet is)
Next, using the 14mm socket, loosen the bolt on the underside (again just loosen) of the alternator(see pic5), then loosen the other bolt(12mm) on the outerside of the alt(bolt a pic6), after the 2 of these are loose, turn bolt b(pic6) to loosen the drive belt, and remove(only loosen enough to remove).
Attachments
Last edited: