Dragger's Guide: Mazdaspeed Protege Quarter Mile Bragging Rights

[j-tech]

-air Intake
-vibrant Exhaust
-8psi
-some Good Tires

60'-2.201

1/8-9.681@ 73.656

1/4-14.91@ 93.134

 

[avarela86]

El bumpo....

13.85 @106

Click sig link for mods....

 

[matt12046]

So my stock msp would do 16's

 

[HighwayUFO]

Went to the track and ran 13.53 @ 111 on 10psi and street tires, untuned.

Car was pretty sluggish up to about 500 feet, at which point the car freight trained to the posted time and trap speed. 3rd and 4th gear is such an awesome feeling.

She should go low 13's or high 12's with injectors, SAFC, and fuel pump.

 

[BOOSTR]

Great run. I like that speed. What was your 60'?

 

[HighwayUFO]

I will have to dig up the slip.

 

[MazdaSpeedSter]

So my stock msp would do 16's

Stock should do a good 15... With a good driver of course...

 

[ForceFed]

I will have to dig up the slip.

Wheres that slip....Times are useless without a slip....

 

[23dude]

so people that are running high 13s and low 14s......is it with stock turbo and stock block? of coarse other add ons.....

 

[LASERBLUE135]

so people that are running high 13s and low 14s......is it with stock turbo and stock block? of coarse other add ons.....

I saw this with my own eyes, stock motor and turbo. Easily into the 13's with drag radials.

Thanks. I didnt vent my bov, bfg drag radials 10-11 psi-if you look at my 60' you can see my tires are still spinning. if i coulf hook up i would have a low 13s car.

 

[thekefren]

So my stock msp would do 16's

I ran a 15.3 stock.
You just need to learn how to drive.
I didn't post it because i have some mods coming and after those are on I will post my time,

----------------
Now playing: MIA - Paper Planes
via FoxyTunes

 

[xelderx]

I would like to add an old member to this list if I could.

Blthlt: 13.16 @ 108

GT28 on stock manifold, ported head and intake manifold, LTW flywheel, MPI w/ extra injectors, Perrin FMIC, K1 rods and Wiesco pistons, 245/45-16 Hankook Rs-2 tires.

http://www.youtube.com/watch?v=2tVs7_H6SXY

 

[SeR_Cyclops]

what PSI?

 

[xelderx]

what PSI?

I believe he was at 15psi that day. He tried 18psi, but he couldn't keep the intake couplers from blowing off.

 

[SeR_Cyclops]

lol nice.

 

[blthlt]

Yes, I was at 15 psi on a pretty rough tune. I was running around 11.8 a/f and didnt have much timing either... oh yea justin dont forget it was 98 degrees that day with track temps in the 130's!

 

[blthlt]

so when do i get my time put up on the list officially?

 

[SeR_Cyclops]

lol never because no one up dates the list
i should start a Dragger;s Guide V2:

 

[SeR_Cyclops]

here ya go:
http://www.mazdas247.com/forum/showthread.php?t=123731046