woot, go you. looks good. good job getting the woman involved.(yupnope)03esProtege said:OK let me just start by saying how much this thread helped me . I have had my indiglo gauges in my car for like 2 yrs and havent had temp or gas . Only way i would know if my gas was low was wait for the light to come on . (flame2) So i got lucky and bought the Msp gauges from Twisted Msp whos motor blew this past week and i try out this how to . bc i didnt want to lose my mileage . his was 75k and mine was almost 40k so if i drove into the dealer they would be like your warranty is up sorry . so here are the pix that i took . I did one set of gauges while my g/f did the other set . TEAM WORK , Let me just say i was so nervous about doing this and having something else go wrong but everything went great . swap the faces on to my cluster and ecu and now i have Everything Gas , Temp , Tach ,with the Mazdaspeed logo . Hot s*** sorry but here are all the pix i took . that came out .
Sorry if i mixed up the order a little bit but you get the picture. Such a easy mod .. Great write up / How to !
hate to dig up an old thread, but i was wondering if anyone could tell me if i could do this with my dx cluster to get a tach. I noticed in the pictures, there are 2 circles one the pcb where the temp/fuel gauge connect. On my cluster there is only one gauge (fuel) I'm wondering if underneath it has 2 circles, or just one. Anyone ever try this with a dx?
you should be able to take a non dx cluster-lx es msp p5 and just swap it and have the cluster work
Its on page 2 of this thread.anyone know what the P/N's are for the bulbs in the cluster??
actually, the two large #194's light up just the center of the gauge cluster, the other two (#74's) light up the tach, and temp gauge...then the idiot lights are each seperate leds if swapped.
I'm not so sure. On my cluster, the engine temp is where the tach would go, so if i took it apart, and put the tach in that spot, wouldn't it just do what the engine temp gauge does, or nothing at all or maybe something crazy?
i wana know what size LED's, voltage, ect. i really dnt wana fry the board.