I put in my DDM Tuning 5000k HID kits today, did the low beams and the fog lights. Here is a guide for anyone else wanting to do it. Install took about an hour for both sets. Do the passenger side headlight first, it's easier. On the headlight bulb wires, the green is positive so match it to the red on the wiring harness.
Tools Needed:
HID kit (I two of these http://www.ddmtuning.com/Products/Apexcone-Raptor-HID-Kit)
Double sided mounting tape
Zip Ties
Phillips Head Screwdriver
Kit laid out on the table with bulbs and ballasts
Remove the white plastic ring but leave the orange one
Access bulb next to windshield washer filler
Driver's side with ballast mounted. Access bulb through the area in the picture. Ballast mounted with double sided tape.
Tools Needed:
HID kit (I two of these http://www.ddmtuning.com/Products/Apexcone-Raptor-HID-Kit)
Double sided mounting tape
Zip Ties
Phillips Head Screwdriver
Kit laid out on the table with bulbs and ballasts
Remove the white plastic ring but leave the orange one
Access bulb next to windshield washer filler
Driver's side with ballast mounted. Access bulb through the area in the picture. Ballast mounted with double sided tape.
Last edited: