3M 1080 - Carbon Fiber Vinyl Wrap

[TreyP]

I put the gloss black di-noc on the trim bar and the button surround. I put them in last year but when I turned on the heater the edges by the vents shrank and warped. I read on some other forums that you have to cut the vinyl around curves. I will reorder some and redo it because I thought it looks way better than stock

Or you can do what I did.

 

[ryan.andersen91]

Put some on my front end, I didn't like the gloss black.

 

[ryan.andersen91]

Awful picture, but I've gone carbon fiber crazy.

I also did the silver trim between the shifter and climate control.

 

[KustombyJustin]

If your going to be using the 3M 1080 series vinyl then do not use the Wet Application Method. 3M does not recommend the use of a wetting agent with the 1080 series films!
The metro restyling CF stuff i am not familiar with so I cant say if it is or isn't. Either way check out RAPID-TAC cleaners & application sprays

 

[undergrad.]

Awful picture, but I've gone carbon fiber crazy.

I also did the silver trim between the shifter and climate control.

Where did you order your vinyl from?

 

[ryan.andersen91]

I buy mine on eBay from https://www.ebay.com (commissions earned). They are the cheapest I can find.

 

[SalazarJ]

Pop Off

Did that piece just pop off ? I'm afraid of breaking something....

Awful picture, but I've gone carbon fiber crazy.

I also did the silver trim between the shifter and climate control.

 

[Notorious97200]

Put some on my front end, I didn't like the gloss black.

I love it on the front end.
I want some CF look on the trim bar inside, and on that front end !
The exterior side plastic "bumpers" need CF too, but I'm afraid it can too much !!

Good idea.