Recent content by zoomzoomin07

just what i know for info check with BEGi group out of Spring TX the do install and tune and have a 170$ off special this month, so 629$ with harness not a bad deal, the xede has dual map set up with ability to change map on the fly and meth injection control as well will soon have a wide band...

kinda what it sounds like, checked it out thought it maybe something loose thats why i just mounts and points working on a mech steth to try and pin point the chatter at idle. mayhave to drop the oil pan and take a look at the rods which i really dont want to that will solidify my need to remove...

I believe i may have the same problem, the sound is somewhat of a chatter only sounding under acceleration, and not in nuetral, car must be moving. if a rod was bent would it chatter constantly, and correlate with rpm of the engine nothing from the clutch though, have you found out anything...

no smoke, havent tried while rolling but I will give that a try, what is your thought process on the following questions. well maybe a built motor is in my future so that the only positive that could come from a blown motor.

okay heres the story took a short 70 mile trip 35 -40 deg outside, drove normally for around 35 miles, car fully warmed up, got on it toying with a honda si and mustang, neways doing lets say over the speed limit, didnt hear any warning, and did not suffer from anytype of cold weather, fuel or...

ive been running my injen cai with the mscai map on my cobb without problem, check the atp turbo intake it is a 3'' short ram, if your looking for the torque of a short ram. might buff out for you

yea a bit more for these i think

installed my DP with same gasket without issue, no leakage at all.

yea just tried with engine off coming out of clutch slowly and nothing i dont think its the return spring, its sounds under the hood read another thread someone mentioned a transmission counterweight, does my SU motormount make that clunk more maybe.

im saying i did that and got nothing bro, it seems to be getting louder but its probably in my head because i listen for it more and more now, it sound like something spring loaded slamming closed but does not effect my drivability at all, just real freakin annoying pull away slowly in first and...

word moneys spent cobb ap, and finished up exhuast next mod defenitaly suspension thanks bell was not available on the only weekend i could get of so went with cobb

checked that spot easy cuz of cai, checked when off nothing, when i slowly come off the clutch in 1st and sometimes 2nd it happens, i put it down to first and tap the gas a few times to make it jerk a bit and it would do it agian only more faint, sucks cuz cant figure it out and dont want to...

damn that looks like it sucks yea 2007 mazdaspeed 3, had motor mount bolt fixed, running a SU rear motormount if really dont know if its when i move cuase if im off the clutch and pop throttle in and out it dont make the noise only as i disengage the clutch so f'n confusing

wierd sound from under the front of my speed, when I start to come off the clutch and on to gas, only in first. I read other have heard or had this simptom, what is it? did it need to be fixed? any info will help?

thanks again yea i dont know about the cobb ap read alot of weird stuff, ended up doing what you just suggested not to but for the price 3'' magnaflow cat 430 from magnaplanet, maybe not the best purchase but.......still got some money left and thinking about going down to san antonio on the...