Search results

2014-2016 Mazda6 2.5L Corksport Short Ram Intake Corksport Intake from my 2015 Mazda6. Very few miles. $130 shipped in the conUS. Will ship almost anywhere if you pick up the cost. List Date: 10/27/2015 For more info, click here to view the original listing: 2014-2016 Mazda6 2.5L Corksport...

2014-2016 Mazda6 H&R Sport Springs I have some H&R sport springs i used on my 2015 Mazda6. I've included a picture of the springs (they are currently removed from the car and ready for shipping. I've also included a picture of the car with the springs. In this picture, the car had 15mm from...

I have the prototype steedspeed manifold here, Ceramic coated, use with a 38mm Tial Wastegate. You will need to supply your own hardware/gaskets. Please be aware that there have been revisions to this manifold since this was made. $215 shipped. I also have pieces for a big maf. 3.25" ID...

CPe Standback v2 Control Boost, Clamp your MAP, Add/Pull Fuel, adjust timing. Comes with wire-in harness, Map Switcher/LED, Standback, And Driver Disc $415 shipped. PM me Please The StandbackTM piggyback engine controller is one of our proudest achievements since the company’s inception...

Used this until i finally figured out the standback boost control with the bigger turbo. $57. This includes shipping and paypal fees. I believe i still have the box and everything that comes with this but am not 100% sure on that. All that is is a cd with instructions. but the only...

Hey guys, I have strayed out of the limits that the accessport can currently handle for my car, so I need to find a different tuning solution. Ill be honest, i didnt like the accessport when i first got it, but the maps have come a long way. There just isnt a map available for me to run my car...

$75 shipped Saikou Michi Stage 2 OCC - Brand new, still in the shrinkwrap. Includes brackets and such. Stage 2 OCC Development Stage 2 OCC features include: 25% larger size than the Stage 1 model This will allow the use of larger barb fittings for those cars that need them. 3/8" Standard...

This is a stock turbo. 18k miles. It was a smoker. This turbo is perfect for a Protege Garage rebuild. $400 shipped.

Ok guys, all I have left for now is a stock Top Mount Intercooler. Looking for $110 shipped. Please be considerate of the fact that it will cost $25-35 to ship this. and this comes with the black cover, boost hoses, and clamps. I will have more stuff coming up here shortly. Stay tuned.

Hi, I have a stock downpipe and midpipe. It was replaced with a CPE Downpipe. I also have a stock TMIC. Both have 17xxx miles. Open to offers, I have ballparks though. Thanks!

The rears take about 20 min. very easy, so i wont comment much on that. it took me about 2 hours to do the front today. kurt (subparpunk) was a huge help. couldnt have done it without him. but the hardest part is the drivers side swaybar bracket bolt... the front one is in just a pain to reach...

FS or FT: Mazdaspeed Cold Air Intake and TRZ Polyurethane Engine Mount Sold!

So today was a dyno day at a local subaru shop... me and subparpunk went to check it out, i had no intentions of dyno'ing but he did. it was a sad day for us. Let me preface the results by saying that an 05 STi mentioned to me that stock, on that dyno he made 219whp. my results were...

GReddy Profec B spec 2 Electronic boost controller Sold!

FS: GReddy Profec B spec 2 Electronic Boost controller $215shipped! Sold!

here are my initial settings for my greddy profec b spec 2. these got me where i want to be. 15psi in Low, and 17.5 in High. I may play with the gain, to get it a little more aggressive, but for right now, its good. Low Settings: Set - 31% (~15psi) Gain - 8% Set Gain (Start Boost) - 116...

Hey, im going to be putting in a boost controller. at this point its not going to be to raise the boost. At this point its just going to be to get 15psi in first and second, and as a boost gauge; mainly the latter. anyone have any starting point suggestions for the settings?

FS: 3" TurboXS Race Pipe Test Pipe Mazdaspeed3 $90 shipped Sold!

on the audi's with map sensors, you could use a diode to control the voltage coming from the map sensor, to get around fuel cut. this seems like a very cheap alternative to the atp boost cut defender... thoughts?

Tinted with "transparent black hobby paint", its made for tinting the windows on model cars... kinda cool... i like the way it turned out