Nothing is wrong. Apparently the Mazda5's rear calipers and rotors are bigger than the Mazda3 and Mazdaspeed3. For 2010 SEMA, the Mazda engineers used MS3 front and Mazda5 rears on the Mazda3 showcar. I am planning to do the same on my 04.
Looking for a set of Mazda5 rear calipers and caliper brackets. Don't need the rotors or brakepads but will take them if they are to be included as a package.
Okay, I have these as my summer tires on my 18"s and a month ago before I switched over to my winters (KW17), I tried running them in 1.5 inches of snow and they were HORRIBLE. (shrug)
I wouldn't recommend anyone running the ASX in snow.
To take off the Carbon fiber trim, you don't need to unscre anything. Open the glove box. Slowly take your fingers and slowly pry underneath the trim. It is held in by clips so just use some force to remove each clip. There is a hook at the end of the trim (right side).
Should come off...
tsunami,
The connector is there in all 2004 HUs. My 04 HU has the connector but not the SAT button. I didn't try to hook it up because I didn't know that the 04 had it until I was i the process of switching the HUs. However, my guess is that even with the connector, the firmware isn't...
Getting2knowMaz: I get no random drop outs with the antenna mounted on my dash. As far as I know, even if you have your antenna mounted outside, the signal will drop when driving under an overpass or covering of trees. If you are getting random drop outs, then thats when you know the signal...
How To: Install Mazda3 Factory Sirius Satellite Radio Tuner
With the 2005 models, the stock HU included a SAT button that is used for the factory Sirius satellite radio tuner. The factory Sirius tuner is fully compatible with the stock HU meaning you wont lose the steering wheel controls...
Rockblocker,
I didn't buy your product, I just looked at a picture of the kit that a person bought and I am just stating my observations. What's with the attitude? All I am saying is from the picture, they sure don't look like they are cut from templates...anyone could look at that kit and...
I wouldn't call these well cut nor are they from a template. Check out the side reflector...I didn't know that our reflectors are cut off at the end. Also check out the rear reflectors...notice how they aren't cut straight.