Vivid pro5 n/a build

[204vividPro5]

A problem

I went for a 20 kms drive still getting the pending code p1250 and it's running a little rough still. I came to a complete stop and my speedometer gauge jumped up and down from 0 to 40 while parked

 

[204vividPro5]

Just now

I just got another new code along with p1250. The new one is p0660, I was reading about it but I don't have the vtcs or vics system....

 

[204vividPro5]

Little update

I've thrown about 8 different codes since the car has been on the road over this past 2 weeks. I've done a bit of research on the few and they are not terrible codes to be overly worried about. I'm trying to figure out the best way to camber the rear in a few degrees along with rolling the lip for my tires to clear when I get bumps and dips along the highways and streets. I don't want to kill my tires or kick my alignnment way off. I have a 17x7 rim with a +45 offset and 215/45zr17 tires... so it's very flush. When I do hit bumps and dips the radius of my tire hits the inside rear quarters.... So just. Looking for some advice....

The codes I've received are: p0660,p0421,p0455,p0401,p1170,p0171,p0130 and p1250

Here is a couple pics of my car and how it sits now