Hey everyone, I just replaced my wastegate and bpv hoses with some nice silicone. People weren't even kidding about the brittleness of the stock hoses, I coudln't get them off some of the fitting, so I would just snap the hose in half instead. Anyways, I got this hose from this site, and I thought it was a pretty good deal.
http://boostcontroller.com/index.php?category=8
The 4mm is just slightly larger ID than stock, and I used some little zip ties to secure the lines on barb fittings. They are big enough to fit up to a 3/16" barb fitting, which is nice because I installed a golden eagle "vacuum manifold" which I could only find 3/16" barbs for.
http://boostcontroller.com/index.php?category=8
The 4mm is just slightly larger ID than stock, and I used some little zip ties to secure the lines on barb fittings. They are big enough to fit up to a 3/16" barb fitting, which is nice because I installed a golden eagle "vacuum manifold" which I could only find 3/16" barbs for.