Need Timing belt help

[boostedhearts]

Ok. i hope i dont get a search noob reply because i have.. and all i find is conflicting information. I bought a 01 yellow MP3 in peices from a shop. I put the engine all back together and put the belt on i rotated the engine and didint think i had any issues. but once i got it in the car and tried to start it... and it didint... checked spark and fuel and had both. so.. did further investigating and realized i think the belt was off. all i find is conflicting diagrams. i found two write ups on here on the 2.0 and i have the belt that way and it is WRONG.

please anyone have any ideas? i need help i have to finish this today.

 

[boostedhearts]

and if anyone is a real expert please call me 406 478 1784

 

[KZL_99ES]

http://www.mazdas247.com/forum/showthread.php?123796676-How-To-Protege-Timing-Belt-Change

http://www.mazdas247.com/forum/show...Timing-belt-replacement-on-1.8-(2.0)-Proteges

use these how-to's, they are pretty handy!

 

[dmention7]

Hopefully this pic helps. Note the locations of the small notches in the teeth directly inline with the I and the E.



EDIT: just read that you bought the motor in pieces...? Have you checked things like the cam position sensor and crank position sensor?

 

[boostedhearts]

witch way should the nock pins on the cams be pointing? i think the gears are on the cams wrong?

 

[dmention7]

I may have a photo of that as well... I'll check when I get home.