Hi guys,
This is my Mazda 2 Sport 1.5 UK
My Dad and I also have a Mazda 323F with a 1.8l Turbo engine from a GT-R --> http://www.club323f.com/forum/viewtopic.php?f=14&t=42067
I've owned my 2 since January 2009!!
January 09
Before LED side lights
After LED side lights
Car or van....
black plastic is far too boring!!
August 2010
old busted:
New hotness!!! Team Dynamics Pro Race 1 17"x7 35ET 4x100
Made my own centre caps from some cheap white ones off ebay, some Mazdaspeed stickers and the old team dynamic ones
Fresh rubber: 205/40/17
i think these new wheels fill the arches better width ways
few more shots:
i think im going to revisit the red stripes! the outer ones are Alloygators which are hard plastic rim protectors and the inner ones are reflective but i might whip them off and either put them on closer to the outside so its a single red stripe OR move them inwards so i have a positive white stripe inbetween the red stripes... think i like the sound of the second option to be honest!
EDIT: i never did revisit the red stripes haha i have recently bought some Team Dynamics Pro Race 3's to replace these (still not fitted)
I lowered her at some point around April 2012 on FK springs that I bought brand new for 30 haha
April 2013
I bought some new parts to freshen her up:
EBC Green stuff pads
EBC GD grooved and dimpled discs
K&N panel filter about an extra 0.001BHP more!!!! haha
Corksport Adjustable shock absorbers
new wheels to replace 3 perfectly good wheels and one that has a crack
I think I probably prefer the old wheels but these will be easier to keep clean!
and an oil change, complete with a K&N oil filter
August 2013
And more recently I fitted the Corksport adjustable dampers which were sitting in my hall for quite a long time!!
September 2013
Much much more recently last week I purchased the following:
Cusco Rear brace (438 311 B16 - http://www.cusco.co.jp/search/en/parts/index.php?manufact=MAZDA&car_name=Demio&kata_name=DE5FS )
Racing beat front sway bar (77100 - http://www.racingbeat.com/Mazda-2/Sway-Bars/77100.html )
Silk road Rigid rear axle kit (60A-I0F - http://www.d224030.win-sv.com/eccube/html/user_data/rigid.kit.php )
Spoon rigid collar chassis strengthener (50261-DE3-000 - http://rigidcollar.shop-pro.jp/?pid=31064527 )
Hopefully will have all this fitted soon! (yippy)
Must remember to take more photos!!
This is my Mazda 2 Sport 1.5 UK
My Dad and I also have a Mazda 323F with a 1.8l Turbo engine from a GT-R --> http://www.club323f.com/forum/viewtopic.php?f=14&t=42067
I've owned my 2 since January 2009!!
January 09
Before LED side lights
After LED side lights
Car or van....
black plastic is far too boring!!
August 2010
old busted:
New hotness!!! Team Dynamics Pro Race 1 17"x7 35ET 4x100
Made my own centre caps from some cheap white ones off ebay, some Mazdaspeed stickers and the old team dynamic ones
Fresh rubber: 205/40/17
i think these new wheels fill the arches better width ways
few more shots:
i think im going to revisit the red stripes! the outer ones are Alloygators which are hard plastic rim protectors and the inner ones are reflective but i might whip them off and either put them on closer to the outside so its a single red stripe OR move them inwards so i have a positive white stripe inbetween the red stripes... think i like the sound of the second option to be honest!
EDIT: i never did revisit the red stripes haha i have recently bought some Team Dynamics Pro Race 3's to replace these (still not fitted)
I lowered her at some point around April 2012 on FK springs that I bought brand new for 30 haha
April 2013
I bought some new parts to freshen her up:
EBC Green stuff pads
EBC GD grooved and dimpled discs
K&N panel filter about an extra 0.001BHP more!!!! haha
Corksport Adjustable shock absorbers
new wheels to replace 3 perfectly good wheels and one that has a crack
I think I probably prefer the old wheels but these will be easier to keep clean!
and an oil change, complete with a K&N oil filter
August 2013
And more recently I fitted the Corksport adjustable dampers which were sitting in my hall for quite a long time!!
September 2013
Much much more recently last week I purchased the following:
Cusco Rear brace (438 311 B16 - http://www.cusco.co.jp/search/en/parts/index.php?manufact=MAZDA&car_name=Demio&kata_name=DE5FS )
Racing beat front sway bar (77100 - http://www.racingbeat.com/Mazda-2/Sway-Bars/77100.html )
Silk road Rigid rear axle kit (60A-I0F - http://www.d224030.win-sv.com/eccube/html/user_data/rigid.kit.php )
Spoon rigid collar chassis strengthener (50261-DE3-000 - http://rigidcollar.shop-pro.jp/?pid=31064527 )
Hopefully will have all this fitted soon! (yippy)
Must remember to take more photos!!