Help with motor mount swap.

[Yaya04]

Has anyone changed out their rear motor mount and if so how long did it take you? Thanks in advance.

 

[mazdaspeedmyk]

My friend and I did it while we were doing other work on my car. I think it'd take about 30-45 min by itself. It wasn't difficult to do at all.

 

[skatethesea]

It really it easy to do. It is easier on a lift cause of the extra space for a breaker bar, but even on jack stands it's not bad at all.

 

[ToNeZ90]

took me 40 minutes by myself, a set of stands, and 2 OEM jacks to lift up the car, replace, and lower the car. Really simple. Just make sure you dont over tighten, and you screw the bolts in by hand first.

Use this to help ya out.

http://support.corksport.com/instructions/Axl-6-125-WEB.pdf

Follow their writeup and u shouldnt have problems

 

[Yaya04]

Thanks for the help.

 

[_Chris]

When I do them here at the shop. I don't even use our lift because it takes longer to get it lifted then to just use a jack and crawl under the car and do it.
Like people have said you can have it done in 30ish mins.

 

[harobmx87]

10-15 mins on my driveway on ramps