I'm about to pull the trigger on a new CX-9 and I'm trying to figure out the trailering options. I have two questions that I can't seem to find answers to. First, from everything I've found, the OEM receiver hitch for the CX-9 has a 1.25" (class II) opening. The sales guy insists that you can get either the 1.25 or the 2.0 (I need the 2.0). Does anyone know if the OEM receiver/hitch is available in 2 inch? If it's only 1.25 I'll just get an aftermarket hitch from the good folks at etrailer.
Second, I have a small boat and the trailer has brakes that requires the use of a flat 5-wire connector. The extra wire disengages the brake so you can back it up. The vehicle I have now has a generic round 7-wire (I think) connector and I use an adapter to get the 5 flat. Has anyone done this on the CX-9?
Thanks for your help!!
Second, I have a small boat and the trailer has brakes that requires the use of a flat 5-wire connector. The extra wire disengages the brake so you can back it up. The vehicle I have now has a generic round 7-wire (I think) connector and I use an adapter to get the 5 flat. Has anyone done this on the CX-9?
Thanks for your help!!