This site explains that the N13 harness has been replaced with the N11A harness:
MAZDA 0000-8E-N03A MAIN HARNESS KIT
(Package of 1 car part)
OLD PART # 0000-8E-N03
NEW PART # NONE
ALT. PART #NONE
SKU # 00008EN03A
http://www.carpartsestore.com/products.php?cat=LAND+ROVER&filter=0000-8E-N03A
I went to my dealer and they ordered the N13A harness for my 2010. I also found out that if you look on the front of your car, near the light relay box, you can see a tab with the designation CA26 or CA27. CA26 = 2000 lbs capability and CA27 = 3500ibs capability, Did not get/see the replacement part number on multiple Mazda Dealership sites, they all had N13A as the harness part. Now if you have the CA26 designation, then you need a jumper harness to get power to the rear in addition to the harness. My parts manager was on the phone with Mazda North Am and they told him this and sent us a sheet describing where to look and why. I discarded the paper as I did not need the jumper harness, but I wished I would have kept it to share on this forum, so I could get the part number for the jumper harness. Sorry All. :C
Last edited: