Video explaining the setup: http://www.youtube.com/watch?v=uUiYrk_LPF4
Video in action: http://www.youtube.com/watch?v=XIya1NEXy4Y
Picture of the setup: http://i.imgur.com/cb3to1M.jpg
I was bored on a long weekend and decided that the universal car mounts with the arms (you know the ones I'm talking about - these pieces of junk http://i.imgur.com/f2zZcCs.jpg ) plus the necessity of plugging the phone in manually was ENTIRELY too much trouble.
Ok, not really... but that was my excuse for putting together a little DIY project!
It turns out that the LG WCP-300 wireless qi charger fits perfectly inside a gutted Schosche Vent Mount (this guy: http://i.imgur.com/rRpZO78.jpg ). I had to cut out quite a bit of little plastic pieces, but the charger is held very securely once the mount is gutted.
Next, I bolted a secure, flat platform to my A-pillar trim piece (the pillar to the left of the windshield) and mounted a flexible arm suction cup mount.
From there, I hard-wired a 2amp usb charger using a fuse-tap and ran the cable up through the dash and out between the A-pillar trim piece and the dashboard. This cable is plugged into the wireless qi charger.
So now, when I get in the car, I just set my phone on the charger, the magnets hold it securely in place, and it charges wirelessly!
It's totally awesome and is definitely the most expensive car mount I've ever had - but it's SO cool!
Total cost: Around $40 for the mount, another $40 for the LG WCP-300 wireless charger.
Video in action: http://www.youtube.com/watch?v=XIya1NEXy4Y
Picture of the setup: http://i.imgur.com/cb3to1M.jpg
I was bored on a long weekend and decided that the universal car mounts with the arms (you know the ones I'm talking about - these pieces of junk http://i.imgur.com/f2zZcCs.jpg ) plus the necessity of plugging the phone in manually was ENTIRELY too much trouble.
Ok, not really... but that was my excuse for putting together a little DIY project!
It turns out that the LG WCP-300 wireless qi charger fits perfectly inside a gutted Schosche Vent Mount (this guy: http://i.imgur.com/rRpZO78.jpg ). I had to cut out quite a bit of little plastic pieces, but the charger is held very securely once the mount is gutted.
Next, I bolted a secure, flat platform to my A-pillar trim piece (the pillar to the left of the windshield) and mounted a flexible arm suction cup mount.
From there, I hard-wired a 2amp usb charger using a fuse-tap and ran the cable up through the dash and out between the A-pillar trim piece and the dashboard. This cable is plugged into the wireless qi charger.
So now, when I get in the car, I just set my phone on the charger, the magnets hold it securely in place, and it charges wirelessly!
It's totally awesome and is definitely the most expensive car mount I've ever had - but it's SO cool!
Total cost: Around $40 for the mount, another $40 for the LG WCP-300 wireless charger.
Last edited: