Search results

Hi Guys: I am thinking about selling (or trading in) my MSP and buying a new car. I have given this some thought and have come up with a few requirements for the new car: 1. $30,000 $2000 price, including destination charge and TTL 2. Rear-wheel or four-wheel drive 3. Some usable space and...

Its been more than 18 months since I have been to the trackBithlo that isand the probability of rain is forecasted to be low on Wednesday evening, so I plan on going. This will be my first time there since my Unichip was custom tuned while running the methanol injection. I will wear pants (as...

I was grabbing some tools from a shelf in my garage this past Saturday when I noticed that my muffler was hanging quite low. I looked underneath my car and noticed that both rear KartBoy exhaust hangers were sheared apart. They apparently broke apart while the car was sitting overnight, as I...

There is a local R & D outfit that is interested in developing new maps for the MSP and a device for loading them through the ODB II portthey have already successfully completed this for the MSM (among other tuner cars). They want to develop a device similar to the Superchips application...

Please see post #17 for an update After searching the LSD threads yesterday and not finding what I was looking for, I have decided to post the question stated in the title. Recently, when turning and applying a moderate to heavy throttle input, I hear a metal-like rubbing- or grinding-type...

I have finally decided to take the time to write-up my experience at Japtrix Racing in Riviera Beach Florida, where I had my MSP tuned this past May. For those that just want to see the numbers, well, you will have to scroll down a bit, because I am first going to blab on about my entire...

Have any of you that have Unichip installed had it tuned by a shop in the central Florida area? I have tried four different shopsCentral Florida Turbo (no longer tune Unichip), Titan Motorsports (won't reply to my email or phone messages), and two other placesand do not know of any others that...

I have been researching plug-n-play devices that would permit me to examine the data the computer "sees" in my MSP via the OBD-II port. In the process, I ran across the GReddy Intelligent Infometer at **********.com ($299). Here is a description of the product: GReddy Intelligent Informeter...

GTA Fuel Enhancer with Viscon Are any of you guys using the GTA Fuel Enhancer with Viscon? Please chime in and give us your opinion. I have done a bit of research on the product (via Google), and have attached a .pdf file with a dyno test of it. Things look promising from what I have read...

I have a few questions for those using the Mazdaspeed 1.3 Bar Radiator Cap. (1) Which one do you have, the red or green? I ask this because there is a difference between the two, and I want to be certain that Corksport (or whoever) sells me the correct one for the MSP. (2) Have you...

I installed an Injen CAI and Boost Sciences ReFlux Diverter Valve this past weekend. The instructions were excellent for both products and the installation went as well as one could expect. I took a hacksaw to the J-arm on the Injen and coverted it to an L-arm so the diverter valve would mate...

Well, after about a two hour Google search I was able to track down a PDF file listing all of the qualified Unichip tuners in North America as of June 2004. Dated, I know, but much better than I had hoped for. After I purchase and install a cold air intake and a new bypass valve, I intend to...

Well I finally took my MSP to a local tuner, Central Florida Turbo (CFT), and put it on their Mustang dynamometer. The trip was initiated by what I thought was some light knocking above 5000 rpms with the Unichip boost on and map A engaged. I was wrong about the knocking, as Rolo (the tuner at...

At present I have the three switches for the Unichip stuffed in the glove box. I am, however, contemplating installing the boost switch and map switch in the two blank plastic panels on the dash adjacent to the dimmer (I purchased a second blank to replace the coin holder). The ECU switch will...

I am going to replace the OEM vacuum line the goes from the tee to the wastegate actuator with silicone hose, as the OEM line is hard and brittle. It literally started cracking and splitting apart today as I went to install the Unichip boost controller. I noticed that the OEM hose is held on...

I installed a homemade H2O intercooler sprayer two weekends ago, and thought that many of you might be interested in my experience with the installation and my seat-of-the-pants take on the performance hike it provides. I should add that II-Savy was of great assistance via the private message...

I have read the "How To" pertaining to the installation of a downpipe (or midpipe) for the MSP along with the numerous other threads associated with this topic. I am nonetheless left with a few unanswered questions. (1) For those who have done the installation themselves, is it possible to...