Search results

cp-e* xFlex* Mazda Mazda3 / Mazdaspeed3 Rear Motor Mount Stage1 Mazdaspeed 3 rear motor mount from CP-E, brand new, 60 durometer hardness. I did have it on the car for 1 day until the wife complained about vibration. There is nothing wrong with the motor mount, there is too much NVH for...

Stock MS3 rear sway bar , brackets & ENDLINKS. This is the perfect upgrade for a regular Mazda3. Includes the MS3 endlinks (12mm). I upgraded to a Cobb rear sway so this has been sitting around. Hope some one can use it. Notice: One end link is perfect, the other works but I had to hold the...

SOLD For Sale: MS3 Exhaust ~ Excellent. Probaly less than 10K miles on the system. I only made 1 clean cut with a sawzall. The system is solid. Shortly after I got my Mazdaspeed 3 I installed the CObb Turbo back exhaust. The entire stock exhaust has been in my garage collecting dust and...

Installed a new product on the market called CurbAlert, that detects front curbs before you damage the front of your car. It's pretty sweet and gives an audible beep when you need to stop. It's adjustable and I have mine setup to alert at 18" from the front of the car. I set mine up to only...

Stock MS3 RSB just taken off of my 07 speed; replaced with an aftermarket bar. Figured a regular 3 could use one :) to stiffen that suspension up a little. Open to offers but asking $110 shipped.

Ok - I need a stock HP fuel pump. I also have a CP-E HPFP (almost new) that I can work out a deal with someone on a trade. PM me for details.

OK y'all know my engine blew. (see here for details) Darrell Cox Racing has my car now and they are going to re-build my motor and do some magic on it. This thread is to update the status of the build and also get advice from others who are more experienced in this area than myself. My goals are...

Well I heard the worst sound of my entire life on Friday July 17th in Danville VA. :'( I drove down from Ohio (500mi) and the car ran like a champ, and got 32mpg to boot. It's about the 5th time I have driven down here. I had my dashhawk on the entire trip down - no knock, everything looked...

hey I got 33k miles on my MS3, just had the primary O2 covered under warantee, would have been $611 normally. I can get 3 star waranttee for 100K miles for $1900 ($100 deductable) or $1700 ($200 deductable). I do most of my own work on the car, just not the really big stuff. Is the extended...

Ok, here's the story..... 2 weeks ago my wife drops me off at the airport (car has been running fine) she drive home (35 miles) and the only thing she did was fill up with premium. The car sat for 2 weeks. I get home yesterday and take the car out , it is a bucking bronco at low rpm. So I figure...

I read the Cobb pdf where they highly suggest you install a catch can. found here: http://www.accessecu.com/accessport/mazda/AP-MAZ-02/MS3-MS6%20Service%20Bulletin%20v1.02.pdf Makes sense to me. ANyone have any suggestions on a kit - I want something thats going to fit good - I don't want...

I have MS3, turbxs fmic, ms-cai, forge bpv. THe forge has been pretty loud and I decided to try something to quiet it down a bit. Here's what I did: I stopped at autozone and bought a pack of Fel Pro Gasket Material: Cork-Rubber; 1/16" Thick ($6 bucks); I took off the forge BPV and traced the...

Been driving now for a week with the CAI on my Speed3. Love the sounds, love the new found power. I have made 3 seperate trips 2 of them 40 miles and today a 60 mile trip. I know the trip puter isn't super accurate but I know for sure my mileage on the highway with cruise is way better. Today...

MS3 ECU reflash rumor - is it true? Can anybody confirm this? Supposedly gets rid of some of the boost limit in 3rd gear. Thanks

I got my MS3 CAI and went out to install it. OK the first step: take off the engine cover. Hum this should be the easiest step right? Wrong. One of the 10mm bolts was cross-threaded by the dealer last time I had her in to fix the P2006 CEL (they replaced the runner). I didn't notice it at...

MS3 Regarding the P2006 CEL - went into the dealer today, they "replaced IMRC unit with new updated part" 0.6 hrs labor (free - covered under warranty) The part number is LEK9-20-170 CEL is gone, the car definitely has better pick-up, plus I reset the trip computer and it was 3 mpg better than...

ProtegeGarage MS3 TMIC - Who has one? Share your experiences. I know Nutari installed the new ProtegeGarage (ETS) TMIC and he liked it. I'm wondering who else has done this and your experiences. Is it worth the money ? Would you buy it again if you no longer had it? I plan on getting either...

Can someone measure the shifter height on the Speed3 for me? I want to do a write up on how to get a FREE short shift for Mazda3 and Speed3 - probably works for the Mazda 6 as well. My short shifter height now is 5 - 5/8 " with the shifter in neutral. Should have measured it before I modded...

Stiffen your Mazda 3, Speed 3 shifter - for $4 I noticed on my Mazdaspeed 3 and there is some sloppiness in the shifter. I read a post on how to change the "sponge bob" rubber bushings with TWM solid aluminum ones. It will cost you something like $26 bucks for the solid aluminum...

Stiffen your Mazda 3, Speed 3 rear engine mount - for $4 I just got a CB Mazdaspeed 3 and there is a bunch of wheel hop and excessive engine movement caused by the rear engine mount design. I read all of the posts on how to fix this by spending $90 and replacing it with the AWR mount with...