Well the tune is really good in the summer but I guess it doesn't like the cold weather to much and since I do alot of highway driving it doesn't help.
I dynod 301 hp and 313 tq with the same tune and mods
And I guarantee the 1st 02 sensor was just extremely dirty but Mazda replaced it for...
Alright so I as soon as I got out of work today I went straight home and let it sit for about an hour to cooldown.
I went ahead and took the 02 sensor out and it had a layer of black s*** all on it. A couple of the holes looked cloged so i went ahead and cleaned it to the best i could. I...
Hi ok I'm typing from my phone but I'll Trt to answer as best as possible.
1. I installed the dp at around 14k miles I have around 42k now
2. It took around 7 months first sensor even though my car since the dp would always randomly throw the 0421 code which I heard is common
3.the bung was in...
Well I installed everything on the car except the new 02 sensor. I checked all the connectors and wiring and everything is ok. No splices or anything even touching the wires near the Ecu I made sure of that from hearing all the stories of people putting intakes on it and the clamp cuts into the...
Ok to give u some background info my 09 mazdaspeed 3 had roughly 29k miles on it with all the mods in my sig. And my cars engine light came on and it was for the p0134 code which is the 1st oxygen sensor, bank one sensor one (the expensive one lol) and I brought it to mazda and they took a look...
Heres my setup 12" JlW7 in a Jl Prowedge Box, Hooked up to a JL Audio 1000 slash v2 amp,Pioneer Navigation F90-Bt deck with the Kanatechs piano black face.
By lexusis3002002 at 2010-07-30
By lexusis3002002 at 2010-07-30
By lexusis3002002 at 2010-07-30
Ok so last night I reset the computer and drove it to work this morning and I have the Cobb ap unmarried. Now the afr work again and the check engine light isn't coming on.
Does this mean my 02 is taking a dump or that it's actually the Cobb ap
If they don't cover it I'll just do it myself. It's so easy to get to probably would take me 20 minutes tops to do. It's just the cost that I'm hoping not to have to buy.
Ok just looked at the wires and everything is fine. Looks like I'm gonna have to bring it to Mazda to see if they will cover it under warranty.
Wish me luck....