J JDMJNKY Banned : Bagged B-Series Oct 16, 2009 #1 Well I'm thinking of painting my msp turbo manifold and s-pipe I have the VHT 2000 degree flame proof paint should this be ok?Anyone done this?
Well I'm thinking of painting my msp turbo manifold and s-pipe I have the VHT 2000 degree flame proof paint should this be ok?Anyone done this?
A aturbolvr Member : 2003 Mazdaspeed Protege Oct 16, 2009 #3 should be fine... but you know the turbo can get a lot hotter than that, right?? i would do the ceramic coating stuff
should be fine... but you know the turbo can get a lot hotter than that, right?? i would do the ceramic coating stuff
J JDMJNKY Banned : Bagged B-Series Oct 17, 2009 #4 aturbolvr said: should be fine... but you know the turbo can get a lot hotter than that, right?? i would do the ceramic coating stuff Click to expand... Yep has ceramic coating + just looking to do manifold and s-pipe not turbo itself.It say's after it's dry to follow these steps to cure it step one:bake at 250 degree's for 30 min's then let cool for 30 min's step two:bake at 400 degree's for 30 mins than let cool for 30 mins step three:bake at 600 degree's for 30 mins than let cool for 30 min's
aturbolvr said: should be fine... but you know the turbo can get a lot hotter than that, right?? i would do the ceramic coating stuff Click to expand... Yep has ceramic coating + just looking to do manifold and s-pipe not turbo itself.It say's after it's dry to follow these steps to cure it step one:bake at 250 degree's for 30 min's then let cool for 30 min's step two:bake at 400 degree's for 30 mins than let cool for 30 mins step three:bake at 600 degree's for 30 mins than let cool for 30 min's
M Matt V Member : 2002 Mazda Protege5 Oct 17, 2009 #6 Looks nice, I think 2000* F will be fine, but for the turbo you should get a higher rating.
J justanothermp5 Banned : Rust Bucket Oct 17, 2009 #7 2000F should be ok on the turbo as long as ur not talking about painting the cast iron section the mani and s pipe might start to flake off cuz those parts get alot hotter then 2000F believe it or not
2000F should be ok on the turbo as long as ur not talking about painting the cast iron section the mani and s pipe might start to flake off cuz those parts get alot hotter then 2000F believe it or not
J jamesk Member : mazda protege 2002 Oct 17, 2009 #8 Yea I did It for my car and It holds up nicely. You can kinda see it behind the heat shield. Attachments 0327091756.jpg 300.3 KB · Views: 92
J JDMJNKY Banned : Bagged B-Series Oct 17, 2009 #9 jamesk said: Yea I did It for my car and It holds up nicely. You can kinda see it behind the heat shield. Click to expand... Yep I see it and thats what I was going for.I really dont want to paint the turbo or the cast part just wanted to clean up the mani and s-pipe make it look alil better.Thanx for the replies guys. Last edited: Oct 17, 2009
jamesk said: Yea I did It for my car and It holds up nicely. You can kinda see it behind the heat shield. Click to expand... Yep I see it and thats what I was going for.I really dont want to paint the turbo or the cast part just wanted to clean up the mani and s-pipe make it look alil better.Thanx for the replies guys.