What have you done to your MSP today?
- Thread starter baconbitz
- Start date
Yeah... but my MSM is using the same old ass technology as the MSP... so my car is closer to it than your new fangled car is.
Maybe you guys can help me out with my MSP issue, since the Help section is a bit lacking in act
And for those wanting more pictures of the skid plate, here ya go.
And for those wanting more pictures of the skid plate, here ya go.
hornsfan10609
Certified Mazda Tech
- :
- 2003.5 Mazdaspeed Protege x2
I'm not sure why but my car started to run richer after a while and reloading the map onto the AFC made all the difference in the world.
thecrash91
Member
- :
- 2003.5 Mazdaspeed Protege
why do people insist on using other peoples maps instead of making your own...? every car is different, especially when they have different mods, your car will react differently and you could be doing damage without knowing it.
exactly. load a base map, then modify it. dont just flash and go. flash a map that is similar to your mods and then tamper with it.
It's not that low. If you hit something with the plate, you probably would have hit it with your oil pan.
That's what I plan on doing. I'm not just going to slap a random map on. I don't have data log option so I need to run it under load with someone in the car and adjust it as we go. Phen and I are going to mess around with it later. I'm just glad I'm running really rich rather than really lean.
protege3690
Member
- :
- 2003.5 MSP #290
anybody in Jersey that can help me tune mine? lol
I'll measure for you when I get home tonight.
Has anyone replaced the factory alarm/keyless entry system? The one on my black MSP appears to be all whacked out. I might take it to the dealership to see if they can tell me what's wrong.
I replaced mine with an aftermarket one after mine went funky on me. Don't forget to check the fuse, it's under rear hatch wiper or something like that in the manual. The first time I had a problem it was just the fuse, the next time it was pretty much shot.
dealer wanted to charge me $80 to re-program it...
there is a re-programming guide somewhere here on 247 its pretty easy to do. i even bought another one off ebay and programmed it myself.
hornsfan10609
Certified Mazda Tech
- :
- 2003.5 Mazdaspeed Protege x2
Um, that's what I did? I chose the FMIC map which lists basically the exact mods I have and the AFRs are solid. Been running it for over a year no problem.
ilovewheels
Member
- :
- msp
finally did my first track day
<a href="http://www.flickr.com/photos/jonashaffer/9409401853/" title="AMP Adams Time Attack Mazda Shootout 7-30-13 by jonashaffer, on Flickr"><img src="http://farm8.staticflickr.com/7417/9409401853_76b0b99954_z.jpg" width="640" height="425" alt="AMP Adams Time Attack Mazda Shootout 7-30-13"></a>
<a href="http://www.flickr.com/photos/jonashaffer/9409401853/" title="AMP Adams Time Attack Mazda Shootout 7-30-13 by jonashaffer, on Flickr"><img src="http://farm8.staticflickr.com/7417/9409401853_76b0b99954_z.jpg" width="640" height="425" alt="AMP Adams Time Attack Mazda Shootout 7-30-13"></a>
Last edited:
- :
- '13 CWP MS3 & '16 Mazda6 GT
Think my tires have a slight flat spot from sitting for a few months... get a wump wump wump wump sound when driving, especially at low speeds....
Hopefully it wears off... these are brand new tires....
Hopefully it wears off... these are brand new tires....
- :
- '13 CWP MS3 & '16 Mazda6 GT
unless a s*** alignment could cause that....havent had the car aligned since doing all the suspension work.
need help w/ the IAT sensor... relocated the MAF in my new MSP due to swapping all the piping and i'm assuming that's what caused the issue...
http://www.mazdas247.com/forum/showthread.php?123832586-P0113-and-P0660
http://www.mazdas247.com/forum/showthread.php?123832586-P0113-and-P0660
