Vacum Hoses

[Spicy1390]

I know this is in the wrong section, but I am hoping for a quick awsner.. Our vacum hoses are 4mm? Is that right. I had one bust on me, and I need new ones that are non stock. Let me know if that is right..

 

[BlkZoomZoom]

We have several sizes.....it depends on what vacuum hose you broke.

 

[Spicy1390]

All the vacum lines that are boost related are all the same size. I tried 4mm before, but they were loose. I think they might be like 3.6 or something..

 

[JFW]

AN-04 (.25" I.D.) works on the waste gate and BOV. You'll need to reduce down to 3/16" for the barb on the manifold.

 

[03MSP]

I just use 7/32", it's a little loose, but it holds fine. If in doubt, get a twistie tie.

 

[jersey_emt]

I was able to shove a 4mm hose onto the intake manifold fitting, and on the BPV.

 

[Spicy1390]

I kinda figued they wouldnt be nice enough to put all one size in. I ordered the 4mm as well as the 3.5 mm from hose techniques. It is way better to buy the per ft then a kit...