setting timming

[MikeyBajer]

just wondering when you put the rotary back together how do you set timming cuz i did not see any timing marks or anything on the rotors or the gears. any info will be greatly appreciated

 

[SpooledupRacing]

timing marks are on the crank pulley and then the mark on the crank position sensor.

Haynes Manual is your friend..

 

[MikeyBajer]

ok but what about when you take the rotors out and how do you know what place they go back in is there marks for that

 

[MikeyBajer]

sorry for the newbie questions its my first rotory rebuild have done a number of piston engines but never the rotory

 

[SpooledupRacing]

get the engine video if u don't know what u are doing..

Rotor placement really is not important.. just have to know which way to instal them so the plates come together right. not like piston engines where the piston needs to be at TDC

 

[MikeyBajer]

so it does not matter how you place the rotors back in as long as everything operates smooth

 

[SpooledupRacing]

yes and no.. to build the engine and get the plates to sit right.. I think the front rotor has to lay at 12 o'clock.. then as u spin the shaft to get the intermediate housing on the rear rotor will lay at like 5 o'clock.