JoshBelton28
Member
- :
- mazda
I've taken a 2008 mazda 3 2.0 L engine and put it into a 2007 mazda 5 2.3 L l, the motor is practically the same and it fits right in, only modified a couple of things but everything that wasnt the same i was able to take off the original mazda 5 motor. The reason i needed to swap out was because the person i bought the car from blew the motor and I bought it expecting to have to find another motor and I did, the 2.0 L mazda 3 engine mounts the same as the 2.3 mazda 5 engine did, but now that I had taken the old motor out and installed the new motor and hooked everything up, I then attempted to start the car and the engine tried to Crank but it would never actually start, it felt like it wanted to turn over but it would never do it. I went back and double checked everything, the wiring harness, plugs, etc and everything was put together and I tried again and held the throttle down but it would not turn.... I need to know what's the problem and how I can fix this issue please. Could it be the computer needs to be reflashed or a gas problem???
Sent from my SAMSUNG-SM-G870A using Tapatalk
Sent from my SAMSUNG-SM-G870A using Tapatalk