Search results

Wrap up some burritos in aluminum foil and put them under the hood. Drive for 20 min, eat.

bababooey

I did the non fouler trick on my car, got rid of a p0420 code...similar to your p0421...The cat doesn't have busted off chunks...you can still see through all the substrate, but I didnt feel like putting in either a new o2 sensor or cat, or both. So far it's been over 10,000 miles, and no 02...

I didn't, but I wish I had. I reused the old rubber seats when i put lowering springs on my car. The new springs rubbed through the old rubber so the metal spring seat was touching the metal spring, and squeaking like crazy on bumps.

google is your friend, son http://www.nationaltire.com/basics/default.asp https://www.rsracing.com/tech-wheel.html http://www.tirerack.com/wheels/tech/techpage.jsp?techid=101

Just put the cheapest organic pads you can find on your car. They are soft, and create lots of dust, but your rotors last longer, and you can just slap a set of pads in when they wear out. They just want to sell you more expensive s*** at the parts store, **** em.

You can get some polyurethane stuff that looks like a water hose, to isolate the ends of your springs. I'm using KYB strut bearings, but the other crap stealership or junkyard

You bastard!!! I love those style rims!!!!! They kick ass!!!!

The rear one is going to require some drilling and what not to fit, A front MSP bar will bolt on if you have the right brackets...i didnt, so i had to butcher up the passenger side bracket to make the cruise control stuff fit. It's a worthwile mod, especially on an older car, it really firms...

No...I put an msp exhaust on mine, and got rid of the plumbing forward of the air box, it didnt make any difference, but above 4000 rpm, in a tunnel it sounds like its cool. Hopefully I'll crash the car, and then i can put the engine in a go kart

http://losangeles.craigslist.org/sgv/pts/1605082096.html It's a 90, but you can compare to your old piece

I have them on my beater 99 protege. They survived a pot-hole ridden detroit winter, and the drive to LA when I relocated...Good and cheap baby, and hella smoooove.

I was going to say why not a 1.8, but it looks like you already have the 1.6...Do it UP!!!

Those look like they're for the front

It's a good looking piece

If it hasn't sold, it only means it's priced too high.

Bust out all the catalytic s*** with a pipe. Best to do it off the car to ensure none of the s*** gets into the head. Then do the non fouler trick to your downstream 02 sensor so yo don't get a check engine light. Find an msp axle back exhaust, bolt it in. I have the msp axle back on my p.o.s...

Bababooey

Get yo readin and ritin on

bump for michigan!!!!