Search results

  1. S

    Mazdaspeed Protege Clutch sticky in the down position

    Hello has anyone else had this issue? Driving along, and then it feels like the clutch pedal just "falls down" is is sticky in the depressed state. You can kick it back up to keep driving but it doesn't seem right. Looks like in general folks have bled their fluids, or its generally a...
  2. S

    MSP pipe that connects to the turbo

    Hey all, my car just got a lot meaner and groans when accelerating. The shop said the pipe connected to the turbo has a hole in it. Do I need to replace this (they said it was cast iron) or should I try a gasket first? If I were to replace this, where can I buy the part?
  3. S

    2003 Mazdaspeed Protege - Delay before it cranks

    Hey guys, just wondering if anyone else has experienced this - when putting in the key, and turning the key, there is a delay before it starts to crank. As long as it cranks, it always starts, but often times there is at least a 2-3 second delay. Any guesses on what this can be/ what the fix it...
  4. S

    Car stalls after acceleration + putting car in neutral

    Hi all - hoping someone can help me with some ideas. All I have modded is an Injen intake. After heavy acceleration (WOT here you can hear the turkey) if I throw the car to neutral, the RPMs will drop down to 0 where it may/may not stall out. Any ideas on what to look for? TIA!
  5. S

    HELP: Intermittent Slight Metal Grinding Noise

    Hi all, all is good in the world - but recently I did a hard run (rare) Thursday night, and on the following day to work on Friday, going to and from work, I heard this thrashing/metal scratching noise up front. Any idea what it could be? Oil levels are ok Turned on/off AC, still...
  6. S

    Hooking Droid Up to Car Stock Kenwood System on MSP

    Really simple question - what do I need to hook up my Droid to my car's audio system? At first I thought I could use a male-male mini 3.5mm cable, but after reading a bit, it looks like I need this instead...
  7. S

    How to change power steering fluid?

    Hi all, Can anyone point me in the right direction in terms of replacing the power steering fluid? From what I hear, I can suck some up from the top, then for the rest, I can pull a hose (not sure which one), and then start pouring in new fluid until all the old has been flushed. Thanks in...
  8. S

    Car Studdering / Hesitation Engine Light On Puttering While Idle

    Hey guys, Drove my MSP kinda hard yesterday, and then late in the evening/ today I realized that from 500-2000 RPMS if I WOT or give it too much throttle, I get some crazy studdering / hesitation that jolts and shakes the car. At one point during idle, the car started to studder, as the rpms...
  9. S

    Help: Temperature Gauge Fluctuating - Cooling Issues

    Hi all, Usually my temp gauge is just under the half way point... just today and yday I noticed in hot summer days its been at the 75-80% mark. I added some coolant and it still happens. Noticed this yday afternoon when I was trying to blast my A/C (maxed out) and nothing but hot air was...
  10. S

    Idling Issue: holds ~ 500rpm when warm

    Hey guys - was wondering if you guys have any input in regards to my funny idle: + When the car is cold, it'll stay around 800-1000 (normal) + When the car warms up, say at a traffic light, it'll fall to 500rpm. + When the car is moving, and I put it in neutral to let it glide, it holds 800rpm...
  11. S

    Noob Spark Plug Wire Question

    Hello guys, So I'm trying to replace my spark plug wires and I just received my order today. I thought the NGK spark plug wire kit (Stock #5659, Part# RC-ZE76) would come with 4 spark plug wires. It only came with two wires, with the longer wire marked as "1" and the shorter wire marked as...
  12. S

    Mazdaspeed Protege Turbohoses SMIC V2

    any comments on this product? would there be enough interest to setup a group buy on this product? (or any other SMIC?) http://www.turbohoses.com/MSP.htm
  13. S

    WTB: DGM Lip Locally (Northern Virginia)

    see title. tia.
  14. S

    Help MSPers with Intakes - Creaks & Squeaks

    I've got a lot of squeaking going on under the hood due to my Injen CAI. Seems like its rubbing on some hoses and bumping into the fan, which is causing annoying creaking / squeaking noises while driving. Do you guys have the same problem with the CAI piping rubbing against hoses and/or the IC...
  15. S

    RADIOHEAD TICKETS this SUNDAY at NISSAN PAV.

    Hey guys, I purchased some Radiohead lawn tickets (for $52 at ticketmaster) and didn't realize it would be mothers day. I would love it if someone could pick this up from me, for $50. This is less than face value. I have 4 tickets. Let me know!! Help a brother out. (yippy)
  16. S

    HELP me pick a helmet (2 second survey)

    (drinks) Hey guys, just got a green kawasaki bike... and was looking into helmets. was wondering if you could help me pick a helmet using this survey (2 seconds literally) https://survey.vt.edu/survey/entry.jsp?id=1183839303263 also, advice on jackets appreciated.
  17. S

    HELP: HOW To change Power Steering Fluid?

    Hey Mazda Community, My fluids are looking pretty dark. How do I flush / change the power steering fluid? The ghetto way that I can think of, is to get something equivalent of a super-sized eye dropper, and suck out some of the old gunk, then add in new, and repeat until the color is what it...
  18. S

    HELP: Motorcycle guys KAWA EX500 or SUZUKI GS500F

    Good Morning Folks, I'm torn b/t a 06 Kawasaki Ninja EX500, or a Suzuki GS500F. I'm 5'4" and am a new rider. I am currently looking in the used market. Can you please offer advice/suggestions on what to choose and why? Also when I buy a used bike, when I inspect it, what should I be...
  19. S

    Recommend me a starter bike

    Hey guys, i'm looking into getting a bike, I've never ridden on one before, so is 600cc a good starter? Also, can you guys throw out some suggestions as to what bike to get? Thanks in advance.
  20. S

    *HELP w/ running lean after installing intake (rd6066)

    - - - - posting for friend - - - - hey guys..i'm a noob with these kinda things... but please help! I'm having some trouble with my car. After installing my intake (rd6066), I came across a couple problems soon after. 1) At times the car would just stall while in motion.. I checked the VAC...
Back