speedblue88
Member
- :
- 2003 Laser Blue P5
Ok so I changed my brake pads and rotors this past weekend. Today it occurred to me that I used the wrong type of lube on the slider pins. So tonight I think, no problem, I'll just take the slider bolt out, swing the caliper open, slide it off, clean the wrong grease away, relube, then put it all back together without having to remove the entire caliper again. Good plan I thought, except that for some reason the caliper won't swing open after I removed the slider bolt. I try to swing it open, but it seems to hit something and won't go any further. What am I missing here?