Found some OEMs style rear fogs on ebay for cheap from PRC $50.
https://www.ebay.com (commissions earned)
Anyone had any luck finding these but in clear around the same price?
Found some OEMs style rear fogs on ebay for cheap from PRC $50.
https://www.ebay.com (commissions earned)
i bought CougarMotor LED Headlight Bulbs at amazon, H11 for my running lights and 9005 for my high beams, my running lights are perfect(they use projectors so that helps focusing the beam correctly), it is a very white light and really nice , however the high beams although very bright the light shoots too high, this high beams are not projectors but regular reflective , is there a way to lower the high beams?? where / how? some people say about a screw in t he back of the assembly that regulates this, i can not find it??? i would hate to change back the high beams to halogens (Philips 9005 CrystalVision Ultra Upgrade Headlight Bulb are my choice in that case) but i do not want to blind people on the road.
No, those interior lights in CX-5 are not CANBUS. Any standard 31mm feston LEDs will work.Are Mazda CX-5 interior lights (2017 model) CANBUS or not? Has any one tried using the non canbus festton bulbs for dome and cargo lights? The number plate light seems to be non canbus.
No, those interior lights in CX-5 are not CANBUS. Any standard 31mm feston LEDs will work.
Cargo illumination (LED) added (dealer accessory):
Did they happen to leave you with the instructions? I wonder if it would fit the USA models.
Sorry they did not.
I am sure it would fit
For 2018 CX-5 Touring, your front turn-signal / parking light uses 7444NA dual-fllament incandescent bulb; rear turn-signal uses 7440NA single-filament bulb (although owner's manual says 7443NA which is incorrect); brake / tail light uses 7443 dual-filament bulb. To prevent hyper-flash switching to LED turn signals, you need to add load resistor for each LED. There're some 7440 LEDs now claim they have built-in load resistor which is plug-and-play but not sure how reliable they would be as load resistor generates a lot of heat. For 7444NA compatible LED get switch-back type which looks nicer and distinctive.So I just got an 18 touring with pep, I want to convert all exterior bulbs to LEDs, for the classier look. Especially turn signals. What are recommended bulbs for turn signals/ brake lights?
Yeah me tooI was more curious where/how the wiring tied in.
Cargo illumination (LED) added (dealer accessory):