MMC Racing
Member
- :
- 2014 Mazda 3s GT
I had one of these sitting around new that I bought over a year ago for another vehicle, but never installed..
And one of these:
I also had a 8 gauge install kit. All I needed was a little motivation to actually do something.. I used these Moroso quick disconnects so the subwoofer could be removed from the car easily:
My thoughts:
I finished it up enough tonight to hear it play, but I still need to do some tuning and tidy up a couple areas. I'll post pictures soon.
And one of these:
I also had a 8 gauge install kit. All I needed was a little motivation to actually do something.. I used these Moroso quick disconnects so the subwoofer could be removed from the car easily:
My thoughts:
- Running the power wire through the firewall on the drivers side is very easy. Just remove the battery and then stick a sharp object from inside the car through the grommet
- Under the passenger set is a great place to install the line converter. Convenient since the Bose amp is right there to tap into
- Since the line converter takes such little power, I tapped the power and ground off the Bose amp also for a very easy install
- Running power and signal cables front to back on the car is very easy. Panels remove easy. Wire could be fished to the hatch area without removing the rear seat
I finished it up enough tonight to hear it play, but I still need to do some tuning and tidy up a couple areas. I'll post pictures soon.