RX-7 & RX-8 Pics thread

Here's my 7 it's a 93 RX7 R1... I guess I will post a mod list as well since a few others did.

Exterior Mods:
C-West Front Facer
C-West Rear Bumper
C-West Carbon Fiber Hatch
Re-Amemyia AD2 Side Skirts
Re-Amemyia AD2 Rear Diffuser
Re-Amemyia AD2 Exhaust Gaurd
Re-Amemyia Super-G N1 Hood
APR Carbon Fiber GTII Fully Adjustable Spoiler
APR Carbon Fiber GTII Mirrors
APR Carbon Fiber GTII Cannards
APR Carbon Fiber Door Trim
Evo-R Sleek Headlight Kit
Evo-R Front Skid Plate
Evo-R Fender Ducts
Hella Pro HID DE Xenon Kit x 2 ($700 a kit. I am running two kits. High/low beam)
Nukabe Front Tow Hook (annodized red)
Nukabe Rear Tow Hook (annodized red)
Cusco Rear Trans Support
Sparco Gas Door Molded into the car
Brand new 4 stage paint. Two-tone paint job. Colors= Mazda Speed Red w/metalalic flake and Matte Black. Less then 3 months old.
Ro_Ja Dark Gunmetal 18" Wheels w/ 40mm offset and 2" polished Lip
Dunlop 275/40/18 Sport Max 9000 (Brand New and comes with two extra sets for the back)
Dunlop 245/40/18 Sport Max 9000 (Brand New and comes with two extra sets for the front)


Interior Mods:
PLX Devices DM-5 Wideband Air/Fuel Gauge w/ Module
PLX Devices DM-100 4-way Fluid Temp Gauge w/Module and sensors
PLX Devices DM-100 EGT w/Module and sensor
Auto Meter Nexsus 30/30 Boost Gauge w/datalogging module and remote
Auto Meter Nexsus Oil Pressure Gauge w/datalogging module and remote
Auto Meter Nexsus Fuel Pressure Gauge w/datalogging module and remote
Auto Meter Nexsus Control Unit w/datalogging module and remote
Auto Meter Tripple Gauge A-Piller
FlyRX7 Center Mount Tripple Gauge Pod (SUPER RARE)
Sparco Lap 5 Steering Wheel
Takata 5point Harness (Brand New less then 2 weeks old)
Takata 5point Harness (Passenger and Driver)
Takata Shoulder Protectors/Pads X 2 (Passenger and Driver)
Greddy Turbo Timer
Greddy Gspeed Counter-Weighted Shift Knob
Greddy Prospeed Pedals
Pettit Racing Short Shifter
Apexi Power FC Commander w/holder
Carbing Carbon Fiber Dash Cluster
Akirtida Custom Cut Din Plate
Nakamechi 6 Disc headunit (Single Din)
Rainbow Audio Componets

Engine Mods:
Pettit Racing built 13B Half-Bridge Ported
3mm Ceramic Apex Seals
Garrett GT35/40R Dual Ballbearing Turbo
HKS Standard Wastegate w/10psi spring
HKS Carbon Ti Muffler
HKS Air Filter
Racingbeat 3" Downpipe
Racingbeat 3" Midpipe
Racingbeat 3" Catback
Yakada FD3 FMIC Kit
Denso 1300cc injectors (Secondaries)
Denso 850cc injectors (Primaries)
Greddy Profec B 2
Greddy Type-S Blow Off Valve
Fluidyne Race Radiator
Fluidyne Dual Oil Coolers
Fluidyne Trans Cooler
Torsen LSD 4.1 gearing
Pettit Racing Coolcharge Kit
Pettit Racing Heat Wrap
Pettit Racing Turbo Jacket
Brembo Cross-drilled and Slotted Rotors
Walbro 255lph In-Tank Fuel Pump
Walbro 255lph In-Line Fuel Pump (Running Dual Pumps)
Apexi Power FC Stand Alone Engine Mangement System
moving to a Autronic SM4 ECU
Apexi HKS Twin Power
Fuel Labs Adjustable Fuel Presure Regulator
KGY Fuel Rails
NGK Monster Wires
NGK Plat. Plugs (9's all around)

21.jpg

IMG_2524bwRED.jpg

IMG_2525CRED.jpg

30.jpg

26.jpg
WOW (boom01)
 
couple pics of our 2nd gen taken during this past weekend Evolution driving school:

tcsonevoschool1.jpg


tucsonevoschool2.jpg


tucsonevoschool3.jpg
 
Oh yes, you've gotta love that big red handle on the inside.

Any chance you've got a pic of the interior from the driver's side. Just curious what all's wired up on that panel by the driver, and how it looks :)

I LOVE how clean the interior of the car is. Excellent work!
 
There are some really hardcore rotary-heads on these Forums...Schweet! (2thumbs) Nice pics guys...Keep 'em coming!

Nice 7 Gonzz...Where did you get that 20b? What mods have you done to it?
S6002798.JPG
 
I can't just leave this thread without reppin the Cosmo...Here's my 20B holdin it down in Kyoto.

IMG_0691%20(Medium).JPG
 
Oh yes, you've gotta love that big red handle on the inside.

Any chance you've got a pic of the interior from the driver's side. Just curious what all's wired up on that panel by the driver, and how it looks :)

I LOVE how clean the interior of the car is. Excellent work!

I will take a pic when I get home. :)
 
Here's one I scrounged up from before the new seat and steering wheel were in the car. This is when the interior was stripped down and before the fire system was redone.

PICT5818Medium.jpg


It's wired to that you flick on the ignition switch (after the master kill outside the car is on), flick on the fuel pump then hit the start button. You also have a switch for the radiator fan, the defrost fan on the windshield and the windshield wiper.

And here's a pic of the interior when it was all stripped and freshly painted:
PICT5792-web.jpg

Since then we've constructed an aluminum structure in the back over the fuel cell as a fire break and put the pump and filter in there. You can see more about this project in the link in my signature.
 
Last edited:
Ohh and me and my bf with the car after my big race (it was HOT in there!!)

IMG_1154Medium.jpg
 
It's a Pettit racing Banzai engine... 550 flywheel hp... Fully built...


There are some really hardcore rotary-heads on these Forums...Schweet! (2thumbs) Nice pics guys...Keep 'em coming!

Nice 7 Gonzz...Where did you get that 20b? What mods have you done to it?
S6002798.JPG
 
Back