Long story short, I'm in a bit if a pickle. I ended up remembering to put the parking brake into service mode AFTER removing the caliper, and the process requires you to step on the brake pedal, so it pushed piston to it's travel limit and bound it up. In a fit of despiration, a backed the small nut off the backside of the caliper until everything came apart. Reassembly seems straightforward enough, other than a small circlip that I can't figure out the proper location or installation of. Any advice, guidance, or diagrams? Should I just bite the bullet and order a new caliper?
https://photos.app.goo.gl/Khffe6n8y9CeHrTF8
https://photos.app.goo.gl/Khffe6n8y9CeHrTF8
Last edited: