I just have to keep posting this to every new MSP owners FB or M247 posts...
This isn't a Honda Civic, parts aren't easy to come by and they are 'expensive'...
If you want over 250hp, here's a good list
-Forged rods/piston combo, $1100
-ARP studs, $250
-Manifold and downpipe combo, $1100
-Gasket set, $110
-Bearings, $150
-Deep sump oil pan, $400
-Doc B setup, $??? (The one mod I need to add that I skipped on)
-Engine management, $200 (used AFC)- $2000 standalone
-Fuel Injectors, $100 (used 440's)
-FMIC, $250 (eBay)- $Good.luck
-Upgraded diff, $700
-Polyurethane engine mounts, $300
-300hp or more? Upgraded transmission internals, MFactory 3/4/5 $750ea.
-Exhaust, $250 ("custom" made by an exhaust shop-$400+ for a used, large diameter bolt-on
And that's assuming you have the knowledge to do all of this yourself and if not, consider labor cost for things you can't do. And these are simply "power" mods that realistically won't get you more than 300whp with the OE GT25. Want to upgrade to a Garrett ball bearing GT28? That's another $1,200. And I consider a larger turbo a "big boy/big power" upgrade. So far you're at $3000-$4000 without it... For a car that I can find here and there with some of these mods already done to them with a blown FSDE for $2000 or less... Then even after spending that much money, you haven't touched anything else on the car- suspension, brakes, chassis...
There are too many people buying these cars, thinking it's a WRX or Evo, throwing 15psi at stock internals and upgraded SMIC pipes then selling the ******' thing for nothing or parting them out when you've got half your engine lying on the side of the road.
I've had the car for almost 5 years now. I knew what I was getting myself into when I got into the "MSP game" having come from a P5 and being a Mazda 'enthusiast' and I still have the car and hate it every ******* day. But I love it. If I didn't know what I know and didn't do what I do, there is no way I'd own one that's heavily modified. Every single time I make one thing "bulletproof" the next weakest component keeps breaking. I'm on my fifth engine, fourth transmission, countless rod bearings in the earlier engines, third GT25 and a **** ton of other, smaller items. If you want to mod this car, do so the RIGHT way. And unfortunately, the right way is the expensive way, there is no other choice.