MSP not boosting like before.

[ek1nspeed03]

Today I have decided to move my maf to the cold pipe. The maf is sitting about 10 inches before the TB and after the bov. It was on the turbo inlet side. It was boosting fine @8psi. Now, it barely hits 5psi. It's not picking up speed like before. I was also running dual bpv/bov setup, now I'm only running bov.

 

[323]

did you make sure everything is tightened up? could be a boost leak. a boost leak test is a good place to start

 

[ek1nspeed03]

I could be, but my boost gauge is reading normal.

 

[hornsfan10609]

What kind of bov? It may need to be adjusted