KrGsMrNKusinagi
Member
- :
- Mazdaspeed 6 GT
Well I got my Grille from CS today and said oh well lets put it on..
Theres a pic of It Before
First you start by removing these two screws
Then you remove the grill it has clips that you pull and snap out be real carefull because you can break them I broke one of the plastic clips on the bottom where the M is but no big deal because Im gonna JB weld it If I ever re-install my Factory Grille or sell it.
Heres a Pic of the bottom of the grille
Heres a Pic of the Car with the Original Grille Gone
Now heres the Autoexe Grill installed. Now during this you are required to use the Included 3m tape on the bottom part it shows you in the Japanese Instructions where to put the 3m tape pretty self-explanatory. Then you just slide it on and be carefull to check that its on good I did my best but was not totally perfect but its near perfect. You also need to reinstall the 2 screws at the top.
And heres the Final Pic..
Sorry i have not really done a write-up before so if you have any questions just let me know.
Theres a pic of It Before
First you start by removing these two screws
Then you remove the grill it has clips that you pull and snap out be real carefull because you can break them I broke one of the plastic clips on the bottom where the M is but no big deal because Im gonna JB weld it If I ever re-install my Factory Grille or sell it.
Heres a Pic of the bottom of the grille
Heres a Pic of the Car with the Original Grille Gone
Now heres the Autoexe Grill installed. Now during this you are required to use the Included 3m tape on the bottom part it shows you in the Japanese Instructions where to put the 3m tape pretty self-explanatory. Then you just slide it on and be carefull to check that its on good I did my best but was not totally perfect but its near perfect. You also need to reinstall the 2 screws at the top.
And heres the Final Pic..
Sorry i have not really done a write-up before so if you have any questions just let me know.
Last edited: