FS: Back to stock sale - Lots of goodies

[sm4rtf00d]

So little history first. I spun a bearing back in 2009 and put the car in the garage hoping to rebuild it one day. My fiance got into an accident back in October '10 and her car was totaled so I had a reason to rebuild my Pro5. I bought a junkyard motor to replace the bad one and i've had problems with the junkyard motor ever since and they wont replace/refund it. My fiance bought a new car so this stopped becoming a necessity and went back to being a project car. I've decided to return the car to stock and use it as a trade in for a new STI. All of these parts I've purchased from members or vendors from this forumn so i'd figure i'd go here to sell them first.


All prices DO NOT include shipping unless noted. I will drive up to an hour to meet to deliver the items. Dibs will be held for 48hours. Now lets begin!


First up.

DGM Carbon Fiber Engine Cover - $150 Shipped.
http://i36.photobucket.com/albums/e34/sm4rtf00d/2011-04-24_11-56-48_230.jpg

DGM OEM Carbon Fiber Hood - $200 + shipping. Needs rebuff/clearcoat Sold to P5Rydah Shipped
http://i36.photobucket.com/albums/e34/sm4rtf00d/2011-04-24_13-40-41_137.jpg

AEM Uego Wideband w/Gauge Pod - $150 shipped. Sold to Skatnrlz1986 Shipped
http://i36.photobucket.com/albums/e34/sm4rtf00d/2011-04-24_11-58-40_578.jpg
http://i36.photobucket.com/albums/e34/sm4rtf00d/2011-04-24_11-59-20_842.jpg

SplitSecond PSC1 w/Cable and software - $220 shipped. Sold to Jitters Shipped
http://i36.photobucket.com/albums/e34/sm4rtf00d/2011-04-24_11-57-44_613.jpg
http://i36.photobucket.com/albums/e34/sm4rtf00d/2011-04-24_17-44-02_516.jpg

OBX Turbo Manifold - $130 + Shipping.
http://i36.photobucket.com/albums/e34/sm4rtf00d/2011-04-16_10-17-48_62.jpg

AWR 70 Duro motor mounts includes manual tranny mount - $300 + shipping. Dibs StealthWyvern
http://i36.photobucket.com/albums/e34/sm4rtf00d/2011-04-16_10-18-24_261.jpg

AWR 21.5mm Sway bar with adjustable end links - $120 + shipping.
http://i36.photobucket.com/albums/e34/sm4rtf00d/2011-04-24_13-37-09_229.jpg

Medieval Leightweight Pulleys Set - $100 + shipping. Sold to Skatnrlz1986 Shipped
Powersteering, Alternator, Crank and water pulley.
http://i36.photobucket.com/albums/e34/sm4rtf00d/2011-04-24_13-51-13_96.jpg
(rest are on the car. couldnt get a good photo. will retake when motor is out.)

Autometer Nexus Gauge Set Includes:
Boost/Vacuum Gauge - 105-6459 - $260 New
EGT/Pyrometer - 105-6445 - $240 New
Oil Pressure - 105-6453 - $260 New
Control Module and Remote - 105-6400 - $255 New

I am looking for $750 for the whole set shipped. Great set, changes colors to match instrument panel. Needs the power cable with the bus fuse. I purchased new wires and a new fuse but didnt put it together but i am including it. You can purchase the original cable from any Autometer wholesaler.
http://i36.photobucket.com/albums/e34/sm4rtf00d/2011-04-16_10-16-01_264.jpg
http://i36.photobucket.com/albums/e34/sm4rtf00d/2011-04-24_11-56-07_88.jpg
http://i36.photobucket.com/albums/e34/sm4rtf00d/2011-04-24_11-56-21_907.jpg

ARP Head studs I torqued them down as specified and ran the engine once. $60 shipped. Sold to Sport23 Shipped
http://i36.photobucket.com/albums/e34/sm4rtf00d/2011-04-24_13-53-25_660.jpg

WRX 440cc Injectors - $110 shipped.
http://i36.photobucket.com/albums/e34/sm4rtf00d/2011-04-24_13-46-00_59.jpg

Cross Drilled Rotors less than 100 miles - $130 + Shipping Sold Locally
http://i36.photobucket.com/albums/e34/sm4rtf00d/2011-04-24_13-54-17_855.jpg
(Couldn't get the sig in there with the picture. Will retake if requested)

Turbonetics Injection Control Unit w/Injectors -
http://i36.photobucket.com/albums/e34/sm4rtf00d/2011-04-24_12-00-46_897.jpg

Auto Protege Wiring Harness (Uncut) - $200 shipped.
http://i36.photobucket.com/albums/e34/sm4rtf00d/2011-04-24_13-43-05_782.jpg

Protege5 Auto ECU turbo? I got this with my first turbo kit. - $50 shipped.
http://i36.photobucket.com/albums/e34/sm4rtf00d/2011-04-24_13-52-20_670.jpg

Protege5 Auto ECU regular. This is the one i took out to put the turbo one in. - $75 shipped.
http://i36.photobucket.com/albums/e34/sm4rtf00d/2011-04-24_13-52-33_203.jpg

Luk replacement clutch with throwout bearing and aligner. Brand New OEM like. - $50 + shipping
http://i36.photobucket.com/albums/e34/sm4rtf00d/2011-04-24_13-49-15_88.jpg
http://i36.photobucket.com/albums/e34/sm4rtf00d/2011-04-24_13-49-36_499.jpg

Protege/Protege5 Valve Cover - $50 + shipping
http://i36.photobucket.com/albums/e34/sm4rtf00d/2011-04-24_13-50-03_700.jpg

Protege/Protege5 Intake manifold - $50 + shipping
http://i36.photobucket.com/albums/e34/sm4rtf00d/2011-04-24_13-50-03_700.jpg

Protege/Protege5 Throttle Body - $30 + shipping
http://i36.photobucket.com/albums/e34/sm4rtf00d/2011-04-24_13-50-03_700.jpg

Set of 10 wheel studs. These DO NOT fit the Protege5. They are about 1/2 inch too long. These are the for the MSP. $10 Shipped.
http://i36.photobucket.com/albums/e34/sm4rtf00d/2011-04-16_10-21-03_510.jpg



Figured i'd throw this out there before i get the questions. The Turbonetics 62-1 T3, Tial Wastegate, FMIC, and the HKS SSQV are all being sold to my cousin.

Also, for the head studs, motor mounts, sway bar, pulleys and OBX header those are still attached to the car. I will be taking them off sometime this week, next weekend at the latest. If they are sold it would give me a reason to take them off.

Uploading the photos. (Missing a few photos. Out taking them.)

 

[sm4rtf00d]

gotta love website timeouts... all my changes... gone... well... reserving this space

 

[skatnrlz1986]

pmed you. i want those pulleys PLEASE!!!!!! ive been searching for a while to finish my set

 

[Sport23]

Dibs on the studs. What is different on the turbo ECU?

 

[sm4rtf00d]

not sure on the ECU i just bought it that way. I'll see if i can dig up the post. I got it from lostsouls. Studs are all yours but which ones? Wheel studs or the ARP head studs?

dug up the sale i got the ECU under:
It is a remapped ECU. Unfortunately i dont know what that means, i just used it with the turbo kit and never had a problem.
http://www.mazdas247.com/forum/showthread.php?123706357-Lots-of-stuff-for-sale

 

[Sport23]

Head studs

 

[jitters]

pm'd about the SSAFC.

 

[P5Rydah]

pm'd hood and engine cover

 

[StealthWyvern]

PM on motor mounts

 

[sm4rtf00d]

all pms answered.

 

[jitters]

Money sent for the SSAFC. Thanks.

 

[MonctonP5]

PM'd re: hood

 

[shootz]

Stink, I miss the pulleys AGAIN!!!

 

[skatnrlz1986]

sorry shootz i've been wanting these forever. if u want/need just the powersteering pulley i can sell that? im getting his full set and have a brand new v2 already

 

[shootz]

sorry shootz i've been wanting these forever. if u want/need just the powersteering pulley i can sell that? im getting his full set and have a brand new v2 already

I have the crank and the PS already... I just want the water pump one really.

 

[skatnrlz1986]

and alt

 

[bellepopol]

Will the carbon fiber cover fit on a MSP/MP3 engine cover ?