Syed Faiz Shah
Member
- :
- Mazda CX9, 2012, Full Option
- Cooling is less at driver side but passenger side and rear side works perfect.
- In the morning and in the evening (when outside temperature is less), driver side cooling is also better, but still less than passenger side.
- In the afternoon, if the car is parked outside in the sun and outside temperature is high. The Driver side AC is hot and gives no cooling, but passenger side works well. But when car moves at speed, drivers side AC gets slightly better. Also when stops in high temperature, only driver's side AC gets hot. Also, while the car is running in the high outside temperature and Rear AC turn off, the AC gets hot.
- 3 months back, on the same complain, Mazda dealer had Top-up the AC Gas, but it had no impact and no improvement to the AC. So it is not the Gas issue.
- Mazda has suggested to replace the Evaporator that is costing USD 1,000/-
- Need advice from members, does it really looks an Evaporator issue or may be something else like controls or sensor problem, possible malfunctioning of servo motors, actuator, air mixing flapper doors etc.
- In the morning and in the evening (when outside temperature is less), driver side cooling is also better, but still less than passenger side.
- In the afternoon, if the car is parked outside in the sun and outside temperature is high. The Driver side AC is hot and gives no cooling, but passenger side works well. But when car moves at speed, drivers side AC gets slightly better. Also when stops in high temperature, only driver's side AC gets hot. Also, while the car is running in the high outside temperature and Rear AC turn off, the AC gets hot.
- 3 months back, on the same complain, Mazda dealer had Top-up the AC Gas, but it had no impact and no improvement to the AC. So it is not the Gas issue.
- Mazda has suggested to replace the Evaporator that is costing USD 1,000/-
- Need advice from members, does it really looks an Evaporator issue or may be something else like controls or sensor problem, possible malfunctioning of servo motors, actuator, air mixing flapper doors etc.