CheeseHelmet
Member
I removed "lower arm" from the steering knuckle using a pickle fork in order to pull the driver's side axle from the differential. Now I'm wondering how to get it back in. Do I just need a standard ball joint press or is there some other way to do it?
I also need to replace the rubber dust boot that covers the ball joint, if you have any tips on how to do that, I'd love to hear them. The service manual lists an SST for getting the new dust boot back in but I suspect a piece of hardwood with a hole through it will be sufficient...
I also need to replace the rubber dust boot that covers the ball joint, if you have any tips on how to do that, I'd love to hear them. The service manual lists an SST for getting the new dust boot back in but I suspect a piece of hardwood with a hole through it will be sufficient...