AAC/Wilwood Big Brake Kit

Status
Not open for further replies.
:
2003.5 MSP
This is the AAC/Wilwood big brake kit for the Protege/P5/MP3. It comes with 4-piston Wilwood calipers, Wilwood street pads, AAC custom brackets and rotor hats, Coleman rotors, and Goodridge stainless braided lines. I have about 30,000kms on this setup and it's way overkill for me. You'll notice the caliper brackets were shaved down to clear the steering knuckle and rotor. It's a tight fit. The pads should be replaced and the rotors can be machined or replaced but otherwise the kit is in good working condition. I have the rotor specs for Coleman to have new ones made up and the pads are Wilwood BP10.

$450usd +shipping

IMG_3160_zps5g77xn9s.jpg


IMG_3162_zpsvw6kejmn.jpg


IMG_3161_zpsropyc1st.jpg


IMG_3163_zpssotga9pb.jpg


IMG_3164_zpszcf41dsw.jpg
 
I ran 15mm spacers with the stock harts. There was less than a millimetre of clearance.
 
Status
Not open for further replies.

Latest posts

Back