1993 AWD MX-3
Due to having a baby, now moving and simply not having time to work on a car I am to selling my nearly completed AWD mx-3 for $2000 or trading for a driving mx3 or miata in good shape (I will also consider trade and adding some money).
I am also open to selling some stuff separately but I do not have time to ship so people will have to meet me or in some cases pull the part off the car themselves. Prices are listed with parts I will take Canadian or united states currency.
http://www.cardomain.com/ride/2241376/1993-mazda-mx-3 here is a link to my not super up to date cardomain site
Body: ($700 includes suspension front and rear AWD subframes and rear axles)
In very good shape no rust that I can find
Extra set of doors that are shaved and have door poppers in them ($300)
Extra set of front fenders ($80)
Needs the front bumper cover
Including Buddy Club 2 side skirts and rear bumper ($150)
Rare RS spoiler ($200)
Extra hood, carbon fiber ($150)
Engine:
BP engine with: ($500 does not include anything with a price listed bellow)
ported/polished/port matched head
bpt323's special modified intake manifold
exintake mod done
OBX adjustable cam gears
1mm oversized flat top valves
overbored wiseco 10.2:1 pistons
ARP head studs
4-2-1 header (I think its pacesetter but can't recall) ($100)
engine was balanced
also has a slightly upgraded oil pump from GTR engine (brand new)
AEM EMS computer to control the engine ($400)
CAS from miata and coil packs to match
custom engine wire harness built by Bpt323 (harness is even designed to add Coil On Plug later if
you want) ($100)
vishnu fuel rail ($100)
Newly professionally cleaned injectors ($60)
oil filter relocation kit ($100)
b6t rods
NGK wires ($30)
Nisan Silvia much larger aluminum radiator custom fitted ($150)
slim fan for radiator ($50)
trans: ($800 for trans/GTR drive shaft/front and rear diff/ axles) Rear subframe has to stay with body
spec 2 dual friction clutch can't recall the company but it was a good one ($80)
fidanza lightweight flywheel ($200)
entire GTR AWD system from front to back.
2 custom built engine/trans mounts to allow the AWD setup to fit into the car.
custom built spacer to allow drive shaft to fit car
custom built mount for carrier baring
brakes:
Front stock GS brakes ($50)
rear 2004 mazdaspeed miata sport breaks ($100)
stainless steel braided brake lines ($60)
Other:
Custom modified from subframe to house gtr trans
Custom built engine support member
Rear frame rails custom built to bolt up the GTR AWD rear subframe
Spare tire well removed and partial enclosure built for fuel cell
Fuel cell included ($60)
Inline fuel pump and inline fuel filter ($100)
SS braided hoses for fuel lines in rear ($100)
Includes a 93 dash frame, and 94 dash frame with dash that can be reassembled if you want
Also front two very hard to find Axles are brand new
Japanese spec GTR rear axles
Also have a 1994 Miata ECU and engine harness for sale for $250
The drive shaft is now also completely installed with a custom spacer between the drive shaft and front diff to make up for the fact the mx-3 is a little longer, and has a custom bracket built for the center carrier bearing (those two items alone cost me just over a grand)
There are also a few aftermarket gauges, a pillar gauge holder ($50), slim visors ($100), aftermarket seats ($200), and a carputer with 7" touchscreen ($200) I will include. I have put nearly $10,000 into this car so my asking prices is very fair.
I would like to wait to see how much interest is in parting it before I let people start taking parts. I hope to sell the entire thing as one set. If parting it does happen I will try to help remove parts but my availability will be extremely limited.
List Date: 4/19/2014
For more info, click here to view the original listing: 1993 AWD MX-3
--------------------------------------
This item is no longer available.
--------------------------------------
Due to having a baby, now moving and simply not having time to work on a car I am to selling my nearly completed AWD mx-3 for $2000 or trading for a driving mx3 or miata in good shape (I will also consider trade and adding some money).
I am also open to selling some stuff separately but I do not have time to ship so people will have to meet me or in some cases pull the part off the car themselves. Prices are listed with parts I will take Canadian or united states currency.
http://www.cardomain.com/ride/2241376/1993-mazda-mx-3 here is a link to my not super up to date cardomain site
Body: ($700 includes suspension front and rear AWD subframes and rear axles)
In very good shape no rust that I can find
Extra set of doors that are shaved and have door poppers in them ($300)
Extra set of front fenders ($80)
Needs the front bumper cover
Including Buddy Club 2 side skirts and rear bumper ($150)
Rare RS spoiler ($200)
Extra hood, carbon fiber ($150)
Engine:
BP engine with: ($500 does not include anything with a price listed bellow)
ported/polished/port matched head
bpt323's special modified intake manifold
exintake mod done
OBX adjustable cam gears
1mm oversized flat top valves
overbored wiseco 10.2:1 pistons
ARP head studs
4-2-1 header (I think its pacesetter but can't recall) ($100)
engine was balanced
also has a slightly upgraded oil pump from GTR engine (brand new)
AEM EMS computer to control the engine ($400)
CAS from miata and coil packs to match
custom engine wire harness built by Bpt323 (harness is even designed to add Coil On Plug later if
you want) ($100)
vishnu fuel rail ($100)
Newly professionally cleaned injectors ($60)
oil filter relocation kit ($100)
b6t rods
NGK wires ($30)
Nisan Silvia much larger aluminum radiator custom fitted ($150)
slim fan for radiator ($50)
trans: ($800 for trans/GTR drive shaft/front and rear diff/ axles) Rear subframe has to stay with body
spec 2 dual friction clutch can't recall the company but it was a good one ($80)
fidanza lightweight flywheel ($200)
entire GTR AWD system from front to back.
2 custom built engine/trans mounts to allow the AWD setup to fit into the car.
custom built spacer to allow drive shaft to fit car
custom built mount for carrier baring
brakes:
Front stock GS brakes ($50)
rear 2004 mazdaspeed miata sport breaks ($100)
stainless steel braided brake lines ($60)
Other:
Custom modified from subframe to house gtr trans
Custom built engine support member
Rear frame rails custom built to bolt up the GTR AWD rear subframe
Spare tire well removed and partial enclosure built for fuel cell
Fuel cell included ($60)
Inline fuel pump and inline fuel filter ($100)
SS braided hoses for fuel lines in rear ($100)
Includes a 93 dash frame, and 94 dash frame with dash that can be reassembled if you want
Also front two very hard to find Axles are brand new
Japanese spec GTR rear axles
Also have a 1994 Miata ECU and engine harness for sale for $250
The drive shaft is now also completely installed with a custom spacer between the drive shaft and front diff to make up for the fact the mx-3 is a little longer, and has a custom bracket built for the center carrier bearing (those two items alone cost me just over a grand)
There are also a few aftermarket gauges, a pillar gauge holder ($50), slim visors ($100), aftermarket seats ($200), and a carputer with 7" touchscreen ($200) I will include. I have put nearly $10,000 into this car so my asking prices is very fair.
I would like to wait to see how much interest is in parting it before I let people start taking parts. I hope to sell the entire thing as one set. If parting it does happen I will try to help remove parts but my availability will be extremely limited.
List Date: 4/19/2014
For more info, click here to view the original listing: 1993 AWD MX-3
--------------------------------------
This item is no longer available.
--------------------------------------
