Hi Guys just would like to share and show a basic DIY of how to Install a Front bumper under garnish kit on a Mazda CX 5 .
Part : Front Bumper Under Garnish
Part number : KD45-V3-890
Difficulty : 1 out of 5
Time : 30 minutes
Tools needed : None
Extra : The original colour of the under garnish kit should be silver. As for my personal preference mine are painted to match the body color.
Step 1 :
Clean front bumper area with spray wax and grease removal on to a microfiber towel .
Step 2 :
Peel a small section of a 3M double tape
Step 3 :
Carefully position the Front under garnish kit. Putting pressure on the side of the peeled back 3M double tape.
Step 4 :
Once seated onto the bumper nicely , carefully peel back the rest of the 3M double tape . Slowly press on edge of Under garnish to make sure the 3M double tape have adhesion to the bumper.
Viola !
Part : Front Bumper Under Garnish
Part number : KD45-V3-890
Difficulty : 1 out of 5
Time : 30 minutes
Tools needed : None
Extra : The original colour of the under garnish kit should be silver. As for my personal preference mine are painted to match the body color.
Step 1 :
Clean front bumper area with spray wax and grease removal on to a microfiber towel .
Step 2 :
Peel a small section of a 3M double tape
Step 3 :
Carefully position the Front under garnish kit. Putting pressure on the side of the peeled back 3M double tape.
Step 4 :
Once seated onto the bumper nicely , carefully peel back the rest of the 3M double tape . Slowly press on edge of Under garnish to make sure the 3M double tape have adhesion to the bumper.
Viola !