Hi everyone, I know this is an old thread, but Im hoping someone here can help.
Using Dnut999s guide, I spent a few hours yesterday installing a powered subwoofer under the drivers seat (amp is built-in). I ran all the wiring (pretty sure correctly), but I should have taken pics.
I have the 2016.5 CX-5 GT with Bose.
After turning the car on, I didnt get any sound at all, from any of the other speakers. I suspect that the problem is the PAC. Im positive I hooked up the PAC harness correctly, but no sound from any speakers.
After disconnecting the PAC, and reconnecting the stock white harness back into the TAU, the sound from all the speakers works again.
Could I possibly have a dead PAC?
I didnt tweak the little arrows on the inside.
( I also might connected the RCA wires to the 2 incorrect back speaker outputs, but Im not sure if that would affect all the cars other speakers)
How do I know if the PAC is powering-on?
Any guidance would be appreciated.