I'm thinking of getting a third spare key, I already have two working ones that came with the car. A brand new smartkey is out of my budget, so thinking of getting a used one off ebay.
Does anyone know if a used already programmed smartkey can be re-programmed using these
instructions below?
Instructions below state unprogrammed key.....
Programming with two programmed advanced keys
1. Bring the programmed advanced keys (2) and a unprogrammed advanced*key into the vehicle.
2. Close all doors.
3. Insert the supplementary*key*into the ignition*key*cylinder.
NOTE:
• Complete the procedures up to Step 7 within 30 s after the supplementary*keyis inserted.
4. Turn the ignition switch to the ON position.
5. Press the UNLOCK button on advancedkey*1.
6. Press the UNLOCK button on advancedkey*2.
7. From the ignition switch in the ON position, switch the ignition switch in the order indicated below.
ACC→ON→ACC→ON→ACC→ON
8. Open the driver-side front door, press the door switch twice, and then close the door.
NOTE:
• After Step 3 is completed and the advanced*key*programming mode is activated, the door lock actuator operates to lock, and then operates to unlock. If the door lock actuator does not operate, repeat the procedure from Step 2.
9. Press the UNLOCK button on the unprogrammed advanced*key*twice.
NOTE:
• After Step 8 is completed and the advanced*key*is programmed, the door lock actuator operates to lock, and then operates to unlock.
10. If programming more advanced keys, remove the supplementary*key*once, and then repeat the procedure from Step 2.
Does anyone know if a used already programmed smartkey can be re-programmed using these
instructions below?
Instructions below state unprogrammed key.....
Programming with two programmed advanced keys
1. Bring the programmed advanced keys (2) and a unprogrammed advanced*key into the vehicle.
2. Close all doors.
3. Insert the supplementary*key*into the ignition*key*cylinder.
NOTE:
• Complete the procedures up to Step 7 within 30 s after the supplementary*keyis inserted.
4. Turn the ignition switch to the ON position.
5. Press the UNLOCK button on advancedkey*1.
6. Press the UNLOCK button on advancedkey*2.
7. From the ignition switch in the ON position, switch the ignition switch in the order indicated below.
ACC→ON→ACC→ON→ACC→ON
8. Open the driver-side front door, press the door switch twice, and then close the door.
NOTE:
• After Step 3 is completed and the advanced*key*programming mode is activated, the door lock actuator operates to lock, and then operates to unlock. If the door lock actuator does not operate, repeat the procedure from Step 2.
9. Press the UNLOCK button on the unprogrammed advanced*key*twice.
NOTE:
• After Step 8 is completed and the advanced*key*is programmed, the door lock actuator operates to lock, and then operates to unlock.
10. If programming more advanced keys, remove the supplementary*key*once, and then repeat the procedure from Step 2.
Last edited: