WTB: MSP rear calipers and jdp front lip
- Thread starter Circuit
- Start date
- Status
There's an even larger set up you can run, and is ALOT easier to source for a rear brake upgrade. 
Try a 98+ 626. There 20mm larger then the MSP set up, and should bolt right up. I havent heard of any MSP guy going this route. But after i used a set of MSP rear brakes on a probe i did a rear disc swap on, theres no reason it wouldnt work. But then you would need to do the calipers, and matching rotors. I believe the pad's are actually the same between both though.
Try a 98+ 626. There 20mm larger then the MSP set up, and should bolt right up. I havent heard of any MSP guy going this route. But after i used a set of MSP rear brakes on a probe i did a rear disc swap on, theres no reason it wouldnt work. But then you would need to do the calipers, and matching rotors. I believe the pad's are actually the same between both though.MSPM1cheLe
DRVRMOD
- :
- 2010 BMW 135i
I'll be in fontana, CA March 2-3.... wanna meet up?
Too late. Already bought one brand new =/
Mods please close this thread. I got everything I needed
- Status
