Boost gauge install

lancebav

Suicide Kings
:
Mazdaspeed Protege 2003.5
I was wondering if anyone has an easy way to pull the a pillar off and instal an auto meter boost gauge into the car i.e wiring for the light and the vacum lines! thx for your help.
 
if you pull off the a pillar(pops right out) its easier to run the wires down the side of the door and down to the fuse box. Buy a Piece at autozone to tap into the fuse box and you can ground it right to the fuse box there are holes in the upper left side of the fuse box that are good places to ground. Just get a screw from home depot.
 
Back