Search results

Hey I deleted my a/c last fall but I never removed the condenser? (I think that's what it's called) in behind the dash. Can it be removed so I don't have the 2 lines hanging out in my engine bay and reduce the cluster in behind the glove box?

I did remove vtcs and vics , I also get p0660 often as well p1170.

.... Okay I have had the p0134 code before, but it hasn't showed up since I last cleared it. I have had the p0421 code so I did the non fouler trick and that fixed that issue so far. Also 6 months ago I swapped my p5 ecu with a mp3 ecu. So would that be causing the p1170? I have a narrow band...

Okay So I pulled and cleaned my egr valve yesterday and reset the ecu and got around 80kms on the car today and the check engine came on so I scanned it and it was P1170 so what can I do for that one? I know it's an issue with the top o2 sensor I will test it and see if it's working properly or...

Okay I live in the Manitoba, Canada , if I block it off the way you have pictured will it be that harmful?? What happens if my car has the canadian egr already should I not be having these problems? Which way is more beneficial

Okay so I've been doing some reading ever since I got the code p0401 I've cleared the egr valve twice over the past 6 months. Can I just do a egr delete and not have any issues with the way the car will run or drive? Will my idle smooth out? Would my car run better with the delete? I just want...

Anyone Does anyone have pics of a 17x9 wheel on there protege?

Okay Okay I would like to pull just gotta figure out the best way to go about it. I'll do some research before I even buy these rims... Any suggestions how to get some camber without adjustment strut mounts And oem struts.

Will 17x9 with a 25 offset fit on my 02 protg5? I'm running 215/45zr17 for tires that I will transfer over to these rims if they work. I am running 2 inch drop springs

Little update I've thrown about 8 different codes since the car has been on the road over this past 2 weeks. I've done a bit of research on the few and they are not terrible codes to be overly worried about. I'm trying to figure out the best way to camber the rear in a few degrees along with...

Latches Still have the aerocatch hood latches available?

Just now I just got another new code along with p1250. The new one is p0660, I was reading about it but I don't have the vtcs or vics system....

A problem I went for a 20 kms drive still getting the pending code p1250 and it's running a little rough still. I came to a complete stop and my speedometer gauge jumped up and down from 0 to 40 while parked

Ya I'm pretty sure I reset the ecu, disconnect the battery and bump the brake? I put a code reader on my car today and I have a p1250 and p0108..... Realized after putting the car back together I forgot to plug back in the map sensor and prc lol my bad seems to be running better but still have...

Alright ill re-torque the bolts, I still gotta put some kms on it to relearn... I sprayed carb cleaner all over the vac ports and intake and couldn't find nothing. Forgot to mention I'm running 94 octane.

Question I got the mp3 ecu installed, vtcs removed, intake ported, new intake gaskets and throttle body gasket... It runs okay but wants to stall out after driving it around

Horn What color or what harness is the horn signal wire? I am installing a new steering wheel and I need to get the horn hooked back up for safety reasons

Sweet Looks good mang! Keep it up always like to see progress!

Awesome! That seams very easy to me... Just gotta figure out which one I want to do now lol

I will have to look I'll have to check It out when I get the car back on the ground. Few more questions, what kinda injectors are considered upgrades for the fs de motor that work with no problems. Also I picked you new to me sedan headlights that I want to swap out because my p5 headlight...