Recent content by zogy

Still Available?

I check the battery and alternator, and the voltages are all fine. The car Start 98% of the time like normal. But once in a while I get a no-crank or an weak cranking; and then cycle the ignition a few times and it start normally. I bought a new starter, which I'll install. But I am...

Bump up for a great seller. Does what he says, and easy to work with.

Hey no shame in that... Before committing to relocate my MAF, I used some exhaust pieces from Pep Boys (pre-bent 90 degree elbows and straight sections. It confirmed that the my stalling issues where caused by the stock MAF location (which they were). It runs so much better with a relocated MAF.

Clutch Pedal Squeaking? Best $10 youll ever spend.. My Clutch pedal has been squeaking since the day I bought my MSP nearly two years ago; and the clutch has gradually been engaging further and further toward the firewall. So much so that it was hard to put it into gear at stop lights and I...

I have mine located behind the right (passenger side) kick panel. There is a recess there where it fits nicely.

If it's coming from the clutch pedal feels like it needs grease), and the clutch it otherwise engaging okay.... you need a new clutch pin, pushing and clip. Under $10 from the Mazda dealer for all three items, and takes 15 minutes to install. I just did it today, and Holy Crap. Best $10 I've...

Do you have the fuse cover (left drivers side kick panel)? The tab is busted on mine. THX

Don't have them in hand yet, but Autozone can get them as well. They are part number 10458 and 10459. Ironically, if you search under Mazdaspeed, they dont come up. But if you search under a standard Protege they show up in the list of options. Look for manual trans, w/ABS and MPS2...

Just wanted to confirm that you caught the note about the check valve in the stock brake booster vaccum line. There should be a "bump" in the vacuum line between the vacuum block and the brake booster (you need to keep the stock vacuum line in that location). The stock brake booster vacuum...

When you get them installed, please report back on the vibration level with respect to the stock mounts. It will be another data point ..... I have some new mounts in my future and an still on the fence about which way to go.... THX

Bump for a great seller. My stuff arrived well packaged, and was all in great shape. And even some bonus stuff .... Thanks...

Ok, I've gotta ask since we're on the subject. I had my ECU flashed a while back, and it did make quite an improvement (the stock programming REALLY sucked). But there are still some flat spots once in a while. So I am gonna put in a SSAFC. Will the Super Stock Map work with a flashed ECU?

Whats the status on the downpipe? ...