-
-
Nnjaremka replied to the thread 2005 Mazda6 Sport wagon buildSubbb :cool:(y)
-
Nnjaremka replied to the thread Laser Blue Protege5 BuildNice! My favorite Mazda6 model (even more than the Mazdaspeed6)
-
Nnjaremka replied to the thread Mazdaspeed Protege Build - Feels Good To Be BackScore! I would go back and grab as many of the MSP specific parts you can get. The steering wheel looks a little rough, but the airbag...
-
Nnjaremka replied to the thread Laser Blue Protege5 BuildYeah, they look like all the others on the market currently
-
Nnjaremka replied to the thread Laser Blue Protege5 BuildMagnaflow made a great exhaust back in the day, and that's the one I ran on my Protege sedan. A little less expensive than the Racing...
-
Nnjaremka replied to the thread Laser Blue Protege5 BuildHow much do you want to spend? Also, there aren't too many product still available for this chassis. Racing Beat makes a great...
-
Nnjaremka replied to the thread 225/50 Tires on a Mazda5 GT?Bigger tire = bigger contact patch. Bigger contact patch = less force per square inch. Basic physics right there.
-
Nnjaremka replied to the thread Help! Replaced Lower Arm is different from OriginalAS long as the hard points mount up, and the alignment can be brought into spec, you'll be fine.
-
Nnjaremka replied to the thread 225/50 Tires on a Mazda5 GT?225/50-17 will be about an inch taller than the 205/50-17 tire. A 225/45-17 will be a closer diameter match the OEM size. I ran...
-
Nnjaremka replied to the thread Help! Replaced Lower Arm is different from OriginalWhen parts in Mazda's system get a design revision, they add the "A" to the end of the number. I wouldn't think twice about the new arm...
-
Nnjaremka replied to the thread Laser Blue Protege5 BuildLooks to me like one of all the other 4-1 short tube headers that are available for the car. Back in the day, the one tog et was either...
-
Nnjaremka replied to the thread Laser Blue Protege5 BuildInteresting coil setup... Looks like instead of running 2 coils, you'll be running 4. That kit is only for the conversion harness...
-
-
Loading…
-
Loading…
-
Loading…
