I'm running a GT28RS MAM Sleeper kit with an FMIC and a Tial 38mm wastegate. I'm hitting about 6-7psi on the boost gauge. What's weird is that I thought I was running just over 6psi of boost, but lately I've been reading right at the 7psi mark on the gauge. The wastegate is 10 years old with a...
There is a shifter control rod that goes to the transmission gear selector and attaches using a bracket on a bushing. I need that whole control rod or just remove the rivet (or sawzall control rod towards the end) and ship me that bit.
Doing the turbo install tomorrow and Sunday, if anyone is around, feel free to PM me to drop by!
Pulling the engine tonight (also if anyone wants to drop by, more than welcome).
So I put my motor back together last night. Cold compression reading was 185-155-190-190. Put in some oil into cyl 2 and it read 190. Cold readings on Mahk's motor were 200-195-195-205. So yeah, Mark's motor it is!
Pulling Mark's motor tonight.
Hey folks, I'm going to be doing a bunch of turbo swap work this weekend (Saturday morning thru 4pm and Sunday thru 7pm). If anyone wants to come over and wrench, I'll buy beers and food. Let me know!
w00t!