I installed this one. Solid as a rock and looks great. My phone is cantilevered off of it with a ram mount and there is no wiggle or vibration whatsoever. It is a bit pricey, but it looks fantastic.
The trim.is simple. Stat at the bottom and pry it straight back. Work upward until.all the clips have released. One thing to note is that the metal tab on the Kuda goes between the silver and black pieces of the trim. It fits in a picket forked where the 2 prices are attached.
Hate to bump an old thread, but have a question about this, if you are still on this forum.So I got the package from KUDA the other day.
Waited tell today to install the unit into the vehicle along with the Universal holder and mount.
It came with a couple of adhesive Pads and I not a big fan of using adhesive in South Texas as it can get pretty hot in a vehicle during the summer months.
Drilled 4 holes into the holder and used some Socket 4/40 bolts and locking nuts to secure the mount to the KUDA fixture.
Then secured the Universal Holder to the Mount.
Here are some pictures of the Mount with the hardware attached to the Kuda and the Whole unit installed in the Vehicle.